I also use the Pin that mentioned in GPIO button seems to latch, maybe wrong resistor value but unsure of cause - #6 by jonathanh but It Not work.
The problem is : When I pulled up Pin the first time, The pin keep value not return to default.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| GPIO button seems to latch, maybe wrong resistor value but unsure of cause | 7 | 4434 | October 14, 2021 | |
| GPIO pull down resistor | 5 | 3912 | October 18, 2021 | |
| Jetson Nano GPIO goes high, but not low | 10 | 4174 | October 15, 2021 | |
| Open door sensor using GPIO | 4 | 525 | March 7, 2023 | |
| Loopback testing using GPIO pins and Setting pull up and pull down for inputs on GPIO | 4 | 1647 | February 23, 2022 | |
| How to set a GPIO pin as a pull-up... simply | 6 | 936 | November 4, 2021 | |
| Jetson nano gpio remains high even after disconnecting the logic high | 8 | 591 | October 18, 2021 | |
| Jetson.GPIO Button Interrupt | 5 | 1562 | October 18, 2021 | |
| Using GPIO on Jetson Xavier NX | 5 | 51 | March 26, 2025 | |
| What are the values read by the GPIO when floating? | 2 | 1153 | June 23, 2020 |