How AGX boot from NVMe with Jetpack 4.6

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier
1

Dear all,

How to boot the AGX Xavier from M.2 NVMe?
Have any best way to do it?
Nvidia have any official way to boot AGX from M.2 NVMe?

Thanks

**Addition info for newbie. I suggest use the Samsung or WD M.2 NVMe. WD Blue SN550 and WD Black SN750 was tested can detected by AGX. NOT all M.2 NVMe are supported by AGX & NX. Be careful when purchase NVMe.

3

Please refer to

https://docs.nvidia.com/jetson/l4t/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/flashing.html#wwpID0E0QN0HA

4

Hi @nocolour , we have created a wiki that can help you with this process, it uses the initrd mechanism. There are some examples for you to try.

Best Regards,
Jimena

1 Like