iSER under ESXI 6.7 can not bind network port

Infrastructure & Networking Software And Drivers
, , ,
1

I’m using latest firmware for MCX512F-ACA_AX (also tried connectx 4) 16.26.1040, latest drivers both iser 1.00.2 and nmlx5_core 4.17.15.16 and no success. I enable iser from console, but after that it’s unbound and there isn’t any way to assing a nic to it. Any help would be appreciated

2

Hi Mihai,

Iser version 1.00.2 was for ESXI 6.5.

Starting with ESXi 6.7, iSER is now an integral part of ESXi and no external iSER driver is required.

See some relevant link below for configuration, you can contact Vmware or consult some blogs for configuration assistance.

https://www.ibm.com/downloads/cas/32AVMKGQ

Sophie.