We are pleased to announce the JetPack 4.4 production release supporting Jetson AGX Xavier series, Jetson Xavier NX, Jetson TX2 series, Jetson TX1, and Jetson Nano. (JetPack 4.4 replaces JetPack 4.3 as the latest production release.) Please read an important NOTE at the end of this announcement Th…

Great! I’m really excited to test all the new updates! Well, I have a Jetson Xavier NX Developer Kit and I’ve just flashed my 64GB MicroSD Card with the new JetPack 4.4 PR, but I’m having a problem with the fan. I was running jetson_clocks as usually, but this time the fan is not working. Also I h…

[DeepinScreenshot_org.gnome.Nautilus_20200708180126] As shown in the screenshot attached, the fans are working OK with the JetPack 4.4DP after running sudo jetson_clocks. Fortunately, I had another MicroSD Card with that version of JetPack. Now, I’m going to change again the MicroSD Card with th…

Hi Yelei, We have made a change in jetson_clock to not forcefully set the fan speed to max but to control is based on the temperature. Hence you dont see the fan turn on with max speed with jetson_clocks. Hope it explains.

Hi, @suhash ! Thanks for the quick response! Actually I was writing about the other screenshot when suddenly the fan started working again but for around 30 seconds, and I didn’t know why, but what you said makes sense. So this means that we won’t be able to set max speed anymore? And finally, at…

Thanks for the warning about the bricking update. Unfortunately it came too late for me as I already had used the apt-get method of updating and was left with a non-working sdcard.

Baleno Etcher complains that the Image file is not flashable, both as a zip file and as an extracted file. It fails with the message: Attention Something went wrong. If it is a compressed image, please check that the archive is not corrupted. alignment must be at most 4194304 bytes No idea what …

Hello The example application argus_camera now segfaults when calling “PROPAGATE_ERROR(m_deviceFocusPositionRange.set(iCameraProperties->getFocusPositionRange()));” which it did not on Jetpack 4.3 with tegra-l4t-r32.3.1 I am working on Jetson NANO devkit.

jetson_clocks still sets max clock rate for the given power mode as it used to. It’s just fan is no longer set to max speed by default. Fan on Jetson AGX Xavier will start to spin at 68C (first trip temperature: 50 C + 18C hysteresis). Complete thermal spec. can be found in power management document …

Too late about this warning for me, please update the thread with a path we can use to recover from the debian package upgrade. Currently I am looking a blank screen for the last 3 hours and my device is quite hot.

JetPack 4.4 - L4T R32.4.3 production release

Robotics & Edge Computing Jetson Systems Announcements

yelei July 8, 2020, 9:50pm 4

Hello again. I’ve run sudo service jetson_stats_boot status on my Jetson Xavier AGX and it shows the same error, but the fans are working as usually, so maybe it has nothing to do with it.

Topic		Replies	Views
JetPack 4.4 - L4T R32.4.3 production release Jetson Xavier NX	32	4574	October 9, 2020
JetPack 4.4 - L4T R32.4.3 production release Jetson AGX Xavier	23	4386	April 20, 2023
JetPack 4.4 - L4T R32.4.3 production release Jetson TX2	13	2827	August 24, 2020
JetPack 4.4 - L4T R32.4.3 production release Jetson TX1	2	1285	September 22, 2020
JetPack 4.4 Developer Preview - L4T R32.4.2 released Jetson Nano	56	9321	July 9, 2020
JetPack 4.5 Production Release with L4T 32.5 Jetson AGX Xavier	31	7043	April 28, 2021
JetPack 4.2.1 - L4T R32.2 release for Jetson Nano, Jetson TX1/TX2, and Jetson AGX Xavier Jetson Nano	64	10719	August 10, 2019
JetPack 4.4 Developer Preview - L4T R32.4.2 released Announcements	14	5173	June 19, 2020
JetPack 4.4 Developer Preview - L4T R32.4.2 released Jetson Xavier NX	11	1559	July 3, 2020
JetPack 4.6 Production Release with L4T 32.6.1 Jetson Xavier NX	45	6194	March 25, 2022

JetPack 4.4 - L4T R32.4.3 production release

Related topics