Dear NVidia Team We are testing JetPack 6.0 with the official kernel 6.7.8 and the AGX Orin Module. Now when we boot the system, we first see the UEFI Menu on our Monitor, but after the screen goes black. Login over ssh is possible. Here you can find the file /var/log/Xorg.0.log and the dmesg out…

We were able to get the display working with kernel 6.6.29 and the JetPack 6.0 release. You can close this ticket.

Dear NVidia Team We checked with the kernel 5.15 and it works, so it has to do with the new kernel version. Thank you.

Hi Nvidia Team Any update on this issue? If you need further information from us, let me know. Thank you.

Dear NVidia Could you please help us with this topic? We tested also with the linux kernel 6.8.1 and see also that after the UEFI, the Display Port is not working anymore. The system boots up and we can connect to it over ssh. Thank you.

It seems like the following messages are causing the issue: host1x drm: iommu configuration for device failed with -ENOENT drm drm: [drm] No compatible format found drm drm: [drm] Cannot find any crtc or sizes We would really appreciate if NVidia could confirm the issue and let us know if there is…

Hi Jonathanh We changed the setting but still face the same behavior. Thank you.

I had the problem that display is not working on 6.6. I think that drivers need updated because I had missmatch: [image] How to build last kernel linux(6.6.6) for JP6? Jetson AGX Orin @johnnynuca14 JetPack 6 GA release is targeted for April 2nd week.

Hi jonathanh Do you have any update on this topic for us? The uefi setting did not solve it. Thank you.

I’m waiting for jetpack 6 GA and try again. In theory is out today 17th April Also I don’t why jetson agx orin is still on 540, and not with 550.67 as kernel open module

Hi Nvidia Team Can anyone confirm this issue and also confirm that JP6.0 GA will solve it? Otherwise we still need support for this case. Thank you.

JetPack 6.0 with kernel 6.7.8 - no display output after UEFI

Robotics & Edge Computing Jetson Systems Jetson AGX Orin

jonathanh April 2, 2024, 9:26am 8

Hello,

Can you try disabling the display hand-off from UEFI to the kernel in the UEFI menu?

To do this enter the UEFI menu and set “SOC Display Hand-Off Mode” to “Never” …

Device Manager -->
     NVIDIA Configuration -->
         Boot Configuration -->
            SOC Display Hand-Off Mode --> 'Never'

Topic		Replies	Views
Dispalyport no signal! Jetson AGX Orin	4	151	September 26, 2024
No Display after upgrading to Jetpack 6.1 Jetson AGX Orin dp-display	20	979	December 18, 2024
Jetson AGX Orin - Black Screen During UEFI-to-Kernel Display Handoff (UEFI 36.4.3-gcid-38968081) Jetson AGX Orin boot , kernel , uefi	1	103	December 17, 2025
No Display Output on NVIDIA Jetson AGX Orin 64GB After Flashing JetPack 6.2 Jetson AGX Orin dp-display	21	1243	May 7, 2025
How to prevent Orin UEFI freezing with custom display? Jetson AGX Orin uefi	9	505	July 18, 2024
Jetson AGX Orin 32GB no Display on Custom Board Jetson AGX Orin board-design , dp-display	13	1840	October 18, 2022
Jetson AGX Developer Kit no display on console Jetson AGX Orin ubuntu	5	405	April 24, 2024
Jetson AGX Orin devkit No Display After Booting Jetson AGX Orin boot	10	347	September 3, 2025
Issues bringing in upstream kernel (6.8.12 in Ubuntu 24.04 LTS) Jetson Orin Nano	5	445	March 10, 2025
AGX Orin Dev-Kit Jetpack 6 no graphical interface Jetson AGX Orin graphics	3	136	July 26, 2024

JetPack 6.0 with kernel 6.7.8 - no display output after UEFI

Related topics