Jetson AGX Xavier - SSD Card help me

[MtHiker]

Refer following topic:

M.2 NVMe compatibility

we are using 500GB Western Digital Blue M.2 SATA3 Solid State Drive, its not being detected https://www.scanmalta.com/newstore/500gb-western-digital-blue-1-5mm-sata3-solid-state.html

@TroyK says
" SAMSUNG 970 EVO M.2 2280 2TB PCIe Gen3" works well with Jetson AGX Xavier.

And from Jetpack 4.4, PCIe Gen4 is supported as well.

Does the Nvidia Xavier support NVME GEN4 SSD?

Nice to see you’ve moved forward. I am very surprised by your solution, though. Usually the way is adding boot arguments into APPEND entry of a /boot/extlinux/extlinux.conf config. If you intend to use a partition from the NVME SSD as Linux rootfs, you would have to do that.

Then, I think you may use the firecuda device on your AGX Xavier.