Have a check if output data rate > 1.5G for your pix_clk_hz to adjust it to try.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Orin jetpack5.1.2 When the data rate of each channel is 1.8Gbps, Csi2 cannot receive frames | 54 | 497 | July 3, 2024 | |
| /dev/video0 node not appearing when loading custom driver to capture pre-configured streaming camera data without i2c | 29 | 3797 | October 14, 2022 | |
| CSI-0 with MIPI 4 lane is not working properly | 23 | 364 | March 17, 2025 | |
| MIPI CSI2 TP2854 2lane x 2channel DUAL but does not work on Jetson Orin Nano | 12 | 107 | August 13, 2025 | |
| Orin Nano Dev board 8G, tc358743, 4-lane, CSI1 (J21), 1080p60, not working | 21 | 1164 | March 13, 2024 | |
| AGX Orin CSI E (Port 4) support | 43 | 291 | March 7, 2025 | |
| AGX Orin connect two 8M cameras open failed | 45 | 2131 | October 9, 2023 | |
| Jetson AGX Orin Camera issue | 7 | 78 | June 4, 2025 | |
| Migrating custom MIPI CSI 2 driver without I2C from Xavier NX JP5.1.2 to Orin NX JP6.1 | 2 | 66 | March 31, 2025 | |
| Mipi problem | 37 | 973 | May 3, 2024 |