As my Jetson Orino has Jetson UEFI Firmware version<36 I have flashed JetPack 5.1.3 image onto microSD card and using it in the hardware. After starting the pop-up shows to reboot but the firmware is not updating in the reboot. When I verify using the comand: sudo systemctl status nv-l4t-bootload…

Thanks for your responses, everything is fine now. The missing part was: nvidia-l4t-jetson-orin-nano-qspi-updater

Jetson Orin Nano Dev kit- nvidia-l4t-bootloader post installation issu

KevinFFF May 24, 2024, 1:31am 3

Hi hegdevijay8,

Are you using the devkit or custom board for Orin Nano?

Could you refer to the steps in the following thread to verify this feature?
Jetson Orin Nano won't update from 3.x to 5.x firmware - #13 by KevinFFF

Topic		Replies	Views
Jetson Orin Nano won't update from 3.x to 5.x firmware Jetson Orin Nano	28	2921	June 13, 2024
Jetson Orin Nano Developer Kit won't update from Jetpack 4.1->5.1.3 Jetson Orin Nano reflash	4	63	December 10, 2024
Can not update firmware when setting up Jetson Orin Nano Jetson Orin Nano reflash	15	908	June 17, 2024
Problem updating to JetPack 6.0 using SD card Jetson Orin Nano boot , reflash	11	306	July 3, 2024
Jetson-orin-nano can not boot Jetson Orin Nano boot	28	429	August 29, 2024
NVIDIA Orin Nano - Firmware Upgrade Jetson Orin Nano boot , reflash	6	154	February 11, 2025
Unable to upgrade the Jetson UEFI firmware to 36.x Jetson Orin Nano uefi	6	773	May 27, 2024
Not able to do firmware update to 36.x on Jetson Orin Nano Jetson Orin Nano reflash	12	490	July 8, 2024
Cannot Boot Brand New Jetson Nano Orin 8GB Jetson Nano system-setup	6	65	January 1, 2025
Jetson Orin Nano Doesn't Boot Up Jetson Orin Nano boot	5	1290	February 13, 2024