Jetson TX1/TX2 Simplified Carrier Schematics

Dear All,

We are building TX1/TX2 based Compact Robot controller. Is there any simplified reference schematics
for the carrier board as the Evaluation Carrier Board is very exhaustive.

We only require the below interfaces:

Power Control/Sequencing Circuit
MIPI Camera

With Best Regards,
B.Saravana Vikram.

Hi, no such simplified reference schematic. But you can follow the OEM DG and devkit schematic to implement Power part design to make sure board can be power up correctly, and then follow OEM DG to do the needed IOs design.