Question: My hardware is: product: NVIDIA Jetson Xavier NX Developer Kit System: Ubuntu 18.04.4 LTS Sometimes when the jetson unexpectedly power off and power on again, during boot, run a program that opencv get rtsp camera stream via gstreamer and the program show below error info in the termi…

Jetson Xavier NX Developer kit gstreamer error

DaneLLL December 9, 2022, 11:22am 6

Hi,
Looks like the memory is used up and it fails to allocate memory for VIC engine.

There are simple samples and please check if you can run these on your device:
Opencv with rtsp source and backgroundsubtractor in Xavier AGX - #3 by DaneLLL

Topic		Replies	Views
Camera: DPB and MjstreamingSocket read error Jetson TX1	33	5092	September 5, 2016
Jetson Xavier NX - RTSP camera open issue Jetson Xavier NX camera , opencv	4	1808	October 18, 2021
Jetson Gstreamer NVRmMemInit failed Jetson AGX Xavier gstreamer	5	1698	January 17, 2023
Jetson Xavier NX self reboot when pulling rtsp stream ( using opencv or using vlc or using gst-launch-1.0 ) Jetson Xavier NX opencv , kernel , gstreamer	4	873	December 22, 2021
SCF: Error InsufficientMemory: Unable to create GL context Jetson TX1	2	1070	October 18, 2021
Opening channel /dev/nvhost-nvdec failed Jetson TX2	7	2017	February 18, 2019
Using GStreamer with the nvcamerasrc errors at TX1 R28.2 Jetson TX1	5	918	May 23, 2018
GPU: Not enough priv cmd buffer space Jetson TX1	22	2224	January 19, 2017
Jetson Xavier NX and MIPI Arducam Gstream error using nvvidconv and NVMM Jetson Xavier NX camera , gstreamer	9	1261	October 18, 2021
Gstreamer NvCamerasrc failed to start after non graceful shutdown Jetson TX1	2	599	October 18, 2021