Hi @JerryChang , Im trying to proceed with ota firmware upgrade , Im using JP 6.2.2 L4T 36.5 i have added the ota_tools(36.5) packages and files to my sdk i used the below command to create the file *sudo -E BOARDID=3767 BOARDSKU=0001 FAB=300 ROOTFS_AB=1 TARGET_BSP=$SDK_BASE/ ./tools/ota_tools…

hello abhiram.m, please visit the jetson-linux-r365 for the updated OTA package, OTA Tools r36.5 (updated on 5/22) .

*** Please note that this reply is generated by LLM automatically *** The error message you’re encountering suggests that the target board and base version you’re trying to upgrade to are not supported by the otatools package. Specifically, the error states that the target board JETSONORINNANODEVKI…

So @JerryChang , if i try the same command with 36-4 can it be upgraded ? will you be able to provide fix for this issue ? is there any work around to do , inorder to fix this issue

hello abhiram.m, yes, please try to run the same commands by using r36.4 OTA tools.

I have copied the ota tools to the Linu_for_tegra/tools/ota_tools/version and then used the below command in 36.5 jp6.2.2 sudo -E BOARDID=3767 BOARDSKU=0001 FAB=300 ROOTFS_AB=1 TARGET_BSP=$SDK_BASE/ ./tools/ota_tools/version_upgrade/l4t_generate_ota_package.sh --external-device nvme0n1 -S 24GiB jet…

hello abhiram.m, [image] abhiram.m: The version of OTA package(R36-4) does not match the version of current system(R36-5), please check whether the OTA package is correct it looks you’ve misunderstand my suggestions. currently, there’s an issue with the r36.5 OTA tools. it means you cannot …

HI @JerryChang , Following are the points I would like to confirm: Is it supported to use JP36.5 along with OTA tools from 36.4 for the upgrade process? I tried performing the OTA upgrade using the below steps: a) Copying the required files into the sdk ota_tools/ folder b) Performing the upg…

hello abhiram.m, >> Q1 there’s version dependency, you cannot work JP-6.2.2 with r36.4 OTA tools. >> Q2 ideally, there’ll be an updated OTA tools package, please wait when it’s available.

thank you @JerryChang for quick response we would be waiting for ota tool package please let us know once its available

Hi @JerryChang Thank you for the support , OTA is working with L4T_36.5 using OTA Tools r36.5 (updated on 5/22) .

NVIDIA ORIN NX OTA

Robotics & Edge Computing Jetson Systems Jetson Orin NX

JerryChang May 19, 2026, 5:40am 4

unfortunately, there’s an issue with the r36.5 OTA tools.
see-also OTA JP6.2.2 to JP6.2.2 support question - #4 by JerryChang

Topic		Replies	Views
OTA Update from 5.1.2 to 6.1 using Jetson Orin NX	6	439	August 7, 2025
OTA update for bootloader Jetson AGX Orin board-design , ota , jetson	3	142	May 25, 2026
OTA Payload Package generation Failed Jetson Orin NX ota	8	488	March 14, 2025
Ota update Failer in jetpack 5.1.2 Jetson Orin NX ota	8	416	December 6, 2024
Board Specific OTA Jetson Orin NX ota	1	175	December 10, 2024
Inquiry regarding OTA update support for Jetson Linux R35 (JetPack 5) to R36 (JetPack 6) migration Jetson Orin NX boot , ota	6	254	February 26, 2026
Is it able to upgrade firmware&system through network? Jetson Orin Nano ota	8	324	April 1, 2025
Jetson NX upgrade from JP5.1 to JP5.1.2 Jetson Orin NX reflash	14	1433	February 2, 2024
Create ota package failed Jetson Xavier NX ota	5	1234	September 27, 2022
Cannot upgrade OTA from R35.4.1. to R35.5.0 Jetson Orin Nano ota	1	360	May 6, 2024

NVIDIA ORIN NX OTA

Related topics