NX Developer Kit PCIe endpoint mode

Hi all,

we’re evaluating the Jetson Xavier NX for our products and we’ve planned to buy the Developer Kit for testing. We’re interested in configuring the NX in PCIe endpoint mode.
Is it possible to connect two NX Developer Kits together via PCIe (or one DevKit and one Linux PC), acting as master/slave, as done with the AGX Xavier Developer Kit?
I know that the NX module supports it, but I wonder if this configuration is also possible using the DevKits.

Thanks.

1 Like

This post [1] completely answers to my question.
Thanks!

[1] Jetson Xavier NX endpoint mode using E3317_A01 RX/TX Swap Board

1 Like