Opencv on tegra B

[nida.rahman1]

Software Version

NVIDIA DRIVE™ Software 10.0 (Linux)

Target Operating System
Linux

Hardware Platform
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)

SDK Manager Version
1.5.0.7774

Host Machine Version
native Ubuntu 18.04

Hi everyone,

I’m using the nvidia drive AGX Xavier.

I would like to know if anyone knows how to install Opencv or Anaconda on TegraB ?

Thank you ☺

[SivaRamaKrishnaNV]

Dear @nida.rahman1,
Could you leverage from the below topics

OpenCV - compile OpenCV 4.1.1 on Drive Software 10.0

Note: OpenCV is not officially supported nor is it optimized on the Drive platform. These instructions are provided only to help with porting/prototyping and is not maintained by NVIDIA. It is recommended to utilize NVIDIA APIs moving forward. Cross compiling OpenCV on host Pre-Conditions: Drive Software 10.0 is installed on the host machine via SDKManager (both host and device). cmake is installed (min version 3.10) The instructions to build OpenCV on Host machine for Drive AGX Linux (V4L)…

Cross compile opencv

Please provide the following info (check/uncheck the boxes after clicking “+ Create Topic”): Software Version DRIVE OS Linux 5.2.0 DRIVE OS Linux 5.2.0 and DriveWorks 3.5 NVIDIA DRIVE™ Software 10.0 (Linux) NVIDIA DRIVE™ Software 9.0 (Linux) other DRIVE OS version other Target Operating System Linux QNX other Hardware Platform NVIDIA DRIVE™ AGX Xavier DevKit (E3550) NVIDIA DRIVE™ AGX Pegasus DevKit (E3550) other SDK Manager Version 1.5.0.7774 other Host Machine V…

[nida.rahman1]

I followed these steps : OpenCV - compile OpenCV 4.1.1 on Drive Software 10.0
I got opencv installed on host PC, but still impossible to install openCV on native drive