你能試試看在現在這個狀態下去/boot/extlinux/extlinux.conf裡面加上FDT 欄位然後指向你的kernel dtb嗎？
我的意思是你手動把你有開PCIe C9的kernel dtb複製進去Jetson之後再用extlinux.conf去指定路徑
這就是rel-35跟rel-36的差異. dtb讀取的路徑預設是不同的.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Orin NX 16GB，Jetpack5.1.2 when enable PCI'e C9（VL805） , the board can't bring up | 21 | 353 | July 30, 2024 | |
| ORIN NX 8GB flashing failed when I set ODMDATA="gbe-uphy-config-9,hsstp-lane-map-3,hsio-uphy-config-0" | 2 | 37 | March 28, 2025 | |
| ORIN NX 16G（jetpack 5.1.1） tegra194-pcie 140c0000.pcie: Phy link never came up | 2 | 451 | January 26, 2024 | |
| 如何更改Jetson 6.1的ORIN NX BSP设备树（以USB与PCIE为例） | 3 | 203 | January 13, 2025 | |
| Jetson Orin NX PCIE C9 Jetpack5.1.4 无法打开使用 | 2 | 38 | February 26, 2025 | |
| Enabling PCIE C7 & C9 with "gbe-uphy-config-9" | 8 | 1025 | February 8, 2024 | |
| To support Orin NX miniPCI pinmux issue | 34 | 1235 | June 7, 2023 | |
| How to modify the pinmux reuse in Orin nano board, compile it into an image and burn it into the Orin nano development board? | 34 | 179 | December 30, 2024 | |
| JetPack 6.0(R36.3.0) jetson orin nx ethernet | 46 | 332 | October 24, 2024 | |
| Jetson Orin NX 16GB with custom carrier board boot failed | 15 | 147 | January 14, 2025 |