PCIE c5 连接wifi芯片，无法link up

[WayneWWW]

寫在gpio controller底下

類似這樣

GPIO setting is not work

Hi, I would like to set GPIO pin to output-low on boot. I moidfy cfg and dts,which are not work. GPIO12 218 TOUCH_CLK GPIO3_PCC.04 BSP:JetPack4.4 R32.4.3 Module: Xavier-NX with emmc dts gpio@c2f0000 { gpio12_output_low { gpio-hog; output-low; gpios = <TEGRA194_AON_GPIO(CC, 4) 0>; label = "gpio12_output_low"; status = "okay"; }; }; dtb convert to dts gpio@c2f0000 { compatible = "nvidia,tegra194-gpio-aon"; reg-names = "security", "gpio", "gte"; reg = <0x0 0xc2f0000 0x0 0x10…