Jetson & Embedded Systems Jetson Orin NX
Topic | Replies | Views | Activity | |
---|---|---|---|---|
JetPack 5.1.3/L4T 35.5.0 is now live
JetPack 5.1.3 , the latest production release for Jetson was released today. JetPack 5.1.3 is a production quality release and a minor update to JetPack 5.1.2. JetPack 5.1.3 packages the same compute stack as of JetPack … |
1 | 372 | February 23, 2024 | |
JetPack 6.0 Developer Preview - Release Announcement
We are very pleased to announce the release of JetPack 6.0 Developer Preview (DP). JetPack 6 comes with an updated LTS Kernel 5.15 and Ubuntu 22.04 based root file system. JetPack 6 also brings in new capabilities not po… |
7 | 1369 | March 12, 2024 | |
JetPack 5.1.2/L4T 35.4.1 is now live
JetPack 5.1.2 , the latest production release for Jetson is now live! JetPack 5.1.2 adds support for Jetson AGX Orin Industrial module and brings new features in bootloader, camera, security and OTA. JetPack 5.1.2 includ… |
4 | 2434 | October 2, 2023 | |
Extended Jetson Xavier Family and Jetson Orin Family Product Lifecycle
We are excited to share, we are extending the Product Lifecycle of Jetson AGX Xavier, Jetson Xavier NX, and Jetson Orin! Find More Details at: Jetson Product Lifecycle Module Old Life Cycle New Lifecycle Jetso… |
1 | 2060 | April 26, 2023 | |
Support for Jetson Orin NX and Jetson Orin Nano in the Jetson Power Estimator Tool
The Jetson Power Estimator tool has been updated with support for Jetson Orin NX 16GB, Jetson Orin NX 8GB, and Jetson Orin Nano 8GB! What is the power estimator tool? PowerEstimator is a power estimation tool for Jets… |
1 | 2357 | April 25, 2023 | |
Jetson Orin NX HW FAQ
Q1: Flashing over USBSS. Flashing over USBSS is now supported referring to Flashing Support — Jetson Linux Developer Guide documentation Q2: RTC0 or RTC1 for default RTC clock during power off? The Original default RTC … |
2 | 3758 | April 7, 2023 | |
Orin NX Unable to Report Voltage and Current In custom Carrier board
|
10 | 118 | March 28, 2024 | |
[Software version control] How to version control nvidia and custom code?
|
4 | 63 | March 28, 2024 | |
Interpret debug trace log : PHY_INTR0 phy:0 cil:1 st:0 vc:0 status:0x00000080
|
14 | 142 | March 28, 2024 | |
Deadlock Issue with GStreamer WebRTC Video Streaming on Orin Jetsons
|
0 | 26 | March 28, 2024 | |
If the power key is captured through software
|
0 | 20 | March 28, 2024 | |
Invalid argument after calling gpuConvertYUYVtoRGB_kernel in 18_v4l2_camera_cuda_rgb
|
0 | 24 | March 28, 2024 | |
How to upgrade tensorrt
|
0 | 22 | March 28, 2024 | |
CAN: Write: No buffer space available
|
0 | 21 | March 28, 2024 | |
Overlay_usb_35.3.1 details
|
8 | 162 | March 28, 2024 | |
Can't capture with oepncv
|
8 | 85 | March 28, 2024 | |
Get the time when the pwm module generates high level each time
|
0 | 20 | March 28, 2024 | |
Fail to install pycuda
|
0 | 24 | March 28, 2024 | |
Jetpack Software installation fails on Orin NX
|
1 | 33 | March 27, 2024 | |
How to obtain accurate UTC0 frame timestamps
|
6 | 112 | March 27, 2024 | |
Use USB0 as host usb on Orin NX custom carrier board(JP 5.1.2)
|
4 | 96 | March 27, 2024 | |
Getting File rcm_staste open Failed when flashing Jetson Orin card from Ubuntu 20.4.4 standalone
|
2 | 42 | March 27, 2024 | |
Flashing custom NixOS image on Jetson NX Orin
|
0 | 36 | March 27, 2024 | |
How to set USB wake-up to default enabled state
|
3 | 94 | March 27, 2024 | |
Modified the UDA size
|
5 | 72 | March 27, 2024 | |
Orin NX with codec NAU88C22 no output
|
3 | 134 | March 27, 2024 | |
Nvpmodel not working on ORIN NX
|
2 | 52 | March 27, 2024 | |
Upgraded 0rin NX from 35.3.1 to 35.5 OTA, now won’t boot without monitor…
|
19 | 161 | March 27, 2024 | |
2 external PCIEx1 Ethernet cannot be recognized when use a 4TB SSD as the system disk
|
11 | 108 | March 27, 2024 | |
[Jetson Linux 35.5.0 GA] Failed to flash image to jetson device due to Error: missing readinfofile
|
4 | 39 | March 27, 2024 |