I’m trying to enable RNDIS over USB 2.0 in Jetson-xavier module based custom board. In our board we didn’t add USB3.0 Host. We have only 2.0, which perfectly works for flashing OS. but failed to enumerate as RNDIS. rapsodo@localhost:~$ dmesg | grep usb [ 0.000000] Kernel command line: root=/dev/…

Hi, Please apply the patch and try again: external-connection { vbus_id_extcon: extcon@1 { compatible = "extcon-gpio-states"; reg = <0x1>; [b]extcon-gpio,name = "VBUS"; extcon-gpio,out-c…

RNDIS failed with USB 2.0

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier

thiru.shetty February 19, 2020, 11:27am 9

Hello DaneLLL,

Thanks for your response,

In my custom design, the VBUS_DETECT pin connected to GND

Please refer attachment of our custom design

Is it possible to make it work or not ? without VBUS ?

Enabling USB device mode

Topic		Replies	Views
Enabling USB device mode Jetson AGX Xavier usb	6	1504	November 8, 2022
NVIDIA NX disabling USB0 as serial console Jetson Xavier NX usb	12	3082	October 18, 2021
USB port issues on a TX2 custom board Jetson TX2	17	2633	October 13, 2021
USB Configuration on Custom board Jetson AGX Xavier	2	1148	October 18, 2021
USB does not working on Jatson AGX Xavier Jetson AGX Xavier	40	8941	October 18, 2021
xusb-padctl report -517 Jetson TX2	18	3288	October 18, 2021
Xavier NX - USB Issues with custom carrier board Jetson Xavier NX usb , board-design , device-tree	14	1527	March 21, 2023
USBs not working Jetson AGX Xavier	14	2210	October 18, 2021
How do I make sure have a dtb that can guarantee the usb0 port works fine as device mode on my custom carrier board? Jetson AGX Xavier board-design	10	972	January 10, 2022
Micro-USB OTG function doesn't work for Xavier Carrier board without TYPE-C Jetson AGX Xavier	5	1194	October 18, 2021

RNDIS failed with USB 2.0

Related topics