Hello, I’m working with the following setup: Jetson Orin Nano 4GB module Custom carrier board Jetpack 5.1.1 / L4T 35.3.1 Sources for the SPE part of the same release The GPIO & GTE example apps are now running fine (thanks for the help on: GTE configuration and usage on SPE ). I modified them to…

Hello, Can you add debounce code in GPIO app and try again? val = gpio_set_irq_type(GPIO_APP_IN, GPIO_IRQ_SINGLE_EDGE, GPIO_IRQ_RISING_EDGE); if (val) { error_hook(“gpio_set_irq_type failed\r\n”); return; } ++ val = gpio_set_debounce(GPIO_APP_IN, 0xff); val = gpio_set_irq_handler(GPI…

SPE: GTE provided TSC sometimes goes backwards

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

maxe777 August 18, 2023, 9:20am 21

Hi @jachen,

Thanks for the prompt confirmation.

Best regards

SPE: GTE provided TSC have unexpected values

Topic		Replies	Views
GTE on linux: duplicated event on GPIO rising edge Jetson Orin Nano gpio	24	1740	January 22, 2024
Hardware Timestamp Engine Jetson AGX Orin kernel	16	233	October 8, 2024
SPE GTE example application for GPIO transitions Jetson Xavier NX spe	10	770	June 29, 2022
Using GPIO interrupt with sysfs not working (maybe config required?) Jetson Orin NX gpio , board-design	30	311	November 26, 2024
Instance with invalid (NULL) class pointer DeepStream SDK	58	3083	December 29, 2022
SPE: GTE provided TSC have unexpected values Jetson Orin Nano spe	17	819	February 21, 2024
C++ code execution speeds up after interrupt is triggered Jetson TX2	12	767	May 16, 2019
How to access/manipulate Always On (AON) GPIOs from the SPE/AON processor? Jetson Xavier NX gpio , spe	26	1519	February 28, 2023
Cannot control GPIO in my driver in the L4T35.3.1 Jetson Orin NX gpio	39	2239	July 25, 2023
GPIO code execution speed increase Jetson Nano gpio	17	1942	June 25, 2021

SPE: GTE provided TSC sometimes goes backwards

Related topics