I’m currently working on a Nvidia Jetson TX2 with Ubuntu 18, using an Emlid Reach GPS Module which is capable of provide NMEA messages through a TCP connection and a 1-PPS signal through a UART pin. I’m not being able to correctly sync the system clock with the GPS clock. I was able to compile the…

I actually found this post most useful: [image] PPS drivers not installing Jetson TX2 Hello, I’m having trouble getting the pps driver to install. So far I’ve followed these steps I added the pps device to the device tree: sources/hardware/nvidia/platform/t18x/common/…

Synchronizing clock with GPS using NMEA messages (TCP source) + PPS signal

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

JerryChang July 27, 2022, 8:23am 3

please see-also Topic 107409 to use GPIO as PPS interface.

Topic		Replies	Views
Add PPS signal from gnss reciever to xavier nx Jetson Xavier NX gps	11	2958	August 11, 2021
Adding PPS input to TX1 for Line Discipline Jetson TX1	6	4346	October 18, 2021
PPS On Jetson Nano Jetson Nano	4	3385	October 18, 2021
Connecting GPS with PPS to Xavier Jetson AGX Xavier	17	5106	October 18, 2021
Enabling PPS on Xavier AGX Jetson AGX Xavier gpio	31	6803	October 18, 2021
How to reuse gpio388 as a pps input in TX2? Jetson TX2 gpio	15	1507	October 18, 2021
As our design ,we need connect the GPS's synchronization signal PPS Jetson AGX Xavier gpio , board-design	2	828	October 18, 2021
how to setup NTPD with GPIO PPS Jetson AGX Xavier	2	839	November 7, 2019
NTP PPS Jetson TX2	4	819	December 11, 2019
Enable PPS on Jetson AGX Xavier Jetson AGX Xavier gps	6	2134	October 18, 2021

Synchronizing clock with GPS using NMEA messages (TCP source) + PPS signal

Related topics