the EGLstream FIFO mode seems doesn't work

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Although, the JetPack3.1 have fixed the problem about frame slowdown in eglstream. See [url]https://devtalk.nvidia.com/default/topic/1011150/visionworks-framesource-slowdown/#[/url]
But I found the Eglstream FIFO mode seemed didn’t work anymore. When I printed the frame Address, the Address always the same even if I changed the FIFO mode size.Either, the mailbox mode had the same address.

2

Hi ClancyLian,
Could share us test code to reproduce the issue?

3

Hi,DaneLLL,

Sorry, there was a mistake when I printed the address. It doesn’t have any problem with the Fifo mode in EGLframe.