Hi, all: Our camera supports trigger mode(sync mode)，We found that only after two trigger signals can we get the image. In function “tegra_channel_ring_buffer()” at code “kernel/nvidia/drivers/media/platform/tegra/camera/vi/channel.c” /* release buffer N at N+2 frame start event */ if (chan->num…

Hi, Please have a try this patch for modify QUEUED_BUFFERS 2 diff --git a/drivers/media/platform/tegra/camera/vi/channel.c b/drivers/media/platform/tegra/camera/vi/channel.c index 0a07f9d..057678f 100644 --- a/drivers/media/platform/tegra/camera/vi/channel.c +++ b/drivers/media/platform/tegra/came…

(tx2)the camera delay N+2 frame

Autonomous Machines Jetson & Embedded Systems Jetson TX2

ShaneCCC September 10, 2020, 2:02am 8

Hi,
Please have a try to reduce the QUEUED_BUFFERS to try.

kernel/nvidia/include/media/mc_common.h

How can i camera display in lowest lantency?

Topic		Replies	Views
NVCSI - Image corruption with L4T r28.2 Jetson TX2	16	2839	October 18, 2021
Camera outputs to 1 buffer only Jetson TX1	59	5629	October 18, 2021
Jetson Xavier yuv422 camera driver [one camera] no reply from camera processor Jetson AGX Xavier camera	35	3516	October 17, 2021
No frame from IMX415 on orin devkit Jetson AGX Orin camera	3	523	November 6, 2023
How to avoid stopping capture after showing "tegra194-vi5 15c10000.vi: corr_err: discarding frame 0, flags: 32, err_data 162" Jetson Xavier NX camera	8	645	October 19, 2022
Custom driver for Jetson tx2 bad preview image Jetson TX2	14	1727	October 18, 2021
IMX219 Raw8 mode on the XavierNX: Disabling CRC Jetson Xavier NX camera	9	2716	December 13, 2021
Xavier NX camera RAW16 Jetson Xavier NX camera	18	1863	October 18, 2021
adv7280m error: PXL_SOF syncpt timeout. Jetson TX2	17	3064	October 18, 2021
Same camera on same carrier board, TX1 works fine,but TX2 can't open camera Jetson TX2	17	1650	October 18, 2021

(tx2)the camera delay N+2 frame

Related topics