VI-output cpu 100%

Robotics & Edge Computing Jetson Systems Jetson AGX Orin
, ,
1

我们使用在基于R35.3.1版本上验证验证mipi信号稳定性对Orin的影响，测试方法是gst运行所有的相机，通过不停地对camera power on/off，看相机图像是否恢复，当验证2路csi时都没有问题，但当验证3路csi时，测试两三次 power on/off，就会出现vi-output 100%，通过论坛更新Topic243051_Jun05.7z 中的libnvscf.so和libnvargus.so的相机库之后，优化了很多，测试二十次左右才会出现一次vi-output 100%，请问还有其他解决问题的方法吗

3

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

Does camera still working? any failed log?