Hi there, Our startup needs to be able to record video while also performing inference on each frame using TensorRT. Our use case needs the frame rate to be as high as possible, and at least above 10FPS. I am facing and issue where when I try to run a python script which records video while also p…

FYI, I found a work-around to this bug in jetson-io.py that makes it complain about a missing “APP_b” partition. Check out my last comment here: [image] SPI_IOC_MESSAGE ioctl for SPI extremely slow Jetson Orin Nano I found the bug in jetson-io.py and implemente…

Hi, Do you use RPi HiQ camera? We support this IMX477 in jetson-io. The IMX477 from other vendor is not supported.

As I said above, yes that’s the camera we are using; it works perfectly fine with 5.1.1 which is what I’m now reflashing our jetsons back to unfortunately

However our original issues, the sudden rebooting, still persist

Hi, Please run the comamnds and share the prints for reference: nvidia@tegra-ubuntu:~$ sudo i2cdump -y -f 0 0x50 No size specified (using byte-data access) 0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef 00: 02 00 fe 00 00 00 00 00 00 00 00 ff 00 00 00 00 ?.?............…

Thanks @DaneLLL will do that once I have a Jetson that is booting up with 5.1.3. Can I ask if you know if its safe to downgrade the Jetsons to 5.1.1 from 5.1.3 via a fresh SD card image reflash? We upgraded all three of the Jetson Orin Nano’s we have on hand to Jetpack 5.1.3 but were unable to inst…

Flashing 5.1.3 back onto an SD card and using that we the Jetson worked in getting it to boot - but we can’t install the imx477 driver with this jetpack via jetson-io still. Here is the output requested, thanks: fov@marvel-fov-test-1:~$ sudo i2cdump -y -f 0 0x50 [sudo] password for fov: No size sp…

Also note that the fan is constantly on or triggered… not too sure what you mean by “when the loading is high”… maybe its supposed to generally only be triggered when running intense workloads but in our case it runs from the moment it turns on until we power it off

Hi, Do you have Ubuntu host PC to cleanly re-flash the Orin Nano developer kit? For using only SD card image to upgrade the system, there may be race condition that partitions in QSPI is not well updated. The version mismatch in QSPI partitions and roots in SD card may trigger unknown issue. We wou…

Hi @DaneLLL , I unfortunately don’t have an Ubuntu host PC, however I have windows with WSL2… is it possible to perform that using WSL? Thanks Tim Update: have found this guide: Windows Subsystem for Linux (WSL) — SDK Manager 2.1.0 documentation (nvidia.com)

Would upgrading to Jetpack6 be advisable here? Or would that cause further issues do you think? I was considering upgrading to JP6 via an SD card image with the devices we have here locally before you suggested using the SDK manager above…

X264 and TensorRT sudden reboot (MJPG encoder not affected, but not fast enough) on Jetson Orin Nano

Robotics & Edge Computing Jetson Systems Jetson Orin Nano

theosib June 18, 2024, 5:46pm 56

FYI, I found a work-around to this bug in jetson-io.py that makes it complain about a missing “APP_b” partition. Check out my last comment here:

Topic		Replies	Views
GPU not detected on Nvidia Jetson Orin Nano after sudden reboot (I need to run TensorRT engine inference) Jetson Orin Nano cuda	1	491	May 23, 2024
JetPack 4.3 - L4T R32.3.1 released Jetson Nano opencv	97	23557	June 24, 2020
JetPack 4.6 Production Release with L4T 32.6.1 Jetson Nano	45	12710	February 16, 2022
Yolov6 Slow inference speed on the Nvidia Jetson NX board Jetson Xavier NX yolo	7	1804	August 24, 2022
Jetson Orin Nano Developer Kit, Jetpack, Cuda, Tensorflow with GPU and TensorRT Jetson Orin Nano tensorflow	15	4139	September 28, 2023
JetPack 4.4 Developer Preview - L4T R32.4.2 released Jetson Nano	56	9104	July 9, 2020
JetPack 3.1 — L4T R28.1 released for Jetson TX1/TX2 Jetson TX2	42	8805	October 20, 2017
JetPack 7.2 / Jetson Linux r39.2 on Jetson Orin Nano Developer Kit — Getting Started and feedback thread Jetson Orin Nano jetson	93	3680	July 12, 2026
Failed to flash Jetson Orin Nano Jetson Orin Nano reflash	5	1652	August 20, 2023
Jetson AGX Orin FAQ Jetson AGX Orin kb	0	28149	December 19, 2022

X264 and TensorRT sudden reboot (MJPG encoder not affected, but not fast enough) on Jetson Orin Nano

Related topics