After I install the deb file for the custom loader, I modified the extlinx.conf file.add the FDT /boot/<dtb_file>, After rebooting, the system could not start. but I test TX2 in the same way,I modified the extlinx.conf file.add the FDT /boot/dtb/<dtb_file>, The system starts up normally after re…

A quick way is you can check the error log first and see if it gets crashed in the same place every time. For example, from the error log, I see there is [ 2.636849] tegra-pcie-dw 14100000.pcie: pex_wake already in use And then system crash. Thus, please let the change for pcie be the last pa…

Xavier add FDT unable to start the system

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier

WayneWWW May 18, 2021, 9:06am 3

Share the log along with your problem please. Also, read following thread to share necessary info.