Jetson & Embedded Systems Jetson Thor
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Jetson Thor Field Bulletin
We are issuing a Field Bulletin relevant to Jetson Thor platform. These bulletins contain important information about hardware, firmware, and operational updates for Jetson Thor modules. Customers and partners are advise… |
|
1 | 189 | November 19, 2025 |
|
Run SGLang in Thor
Run SGLang Thor & Spark Install uv curl -LsSf https://astral.sh/uv/install.sh | sh Create environment uv venv .sglang --python 3.12 source .sglang/bin/activate sudo apt install python3-dev python3.12-dev Export va… |
|
14 | 671 | December 2, 2025 |
|
Run VLLM in Thor from VLLM Repository
Run VLLM Thor Install uv curl -LsSf https://astral.sh/uv/install.sh | sh Create environment uv venv .vllm --python 3.12 source .vllm/bin/activate Install Pytorch uv pip install torch torchvision torchaudio --inde… |
|
15 | 968 | November 29, 2025 |
|
Jetson AGX Thor FAQ
Q: How to bypass “Failed to get eeprom handle for cvm from eeprom manager.” error during flash? This kind of issue generally comes from the i2c drive strength not enough on custom board design. Need to follow the tuning… |
|
2 | 750 | November 16, 2025 |
|
After compiling the custom kernel and .ko modules, flashing failed
|
|
14 | 42 | December 29, 2025 |
|
Pactl list not see bluetooth PipeWire
|
|
2 | 14 | December 29, 2025 |
|
After installing Jetpack, the extlinux.conf file was modified
|
|
8 | 35 | December 28, 2025 |
|
基于38.2.1的Linux_for_Tegra和rootfs刷机之后首次上电iperf3.service自动打开了 上电会自启动是什么原因
|
|
5 | 21 | December 28, 2025 |
|
Using Jetson AGX Thor for LLM Finetuning and got some questions
|
|
0 | 10 | December 27, 2025 |
|
Apt.jetson-ai-lab.io is down
|
|
1 | 12 | December 27, 2025 |
|
Jetson AGX Thor dev kit GRUB boot failure
|
|
1 | 11 | December 27, 2025 |
|
Stage completed without automatically rebooting
|
|
1 | 11 | December 26, 2025 |
|
Thor enable 25G but nvpmodel Fail
|
|
17 | 75 | December 26, 2025 |
|
AGX Thor - JTAG
|
|
1 | 18 | December 25, 2025 |
|
Nvidia Jetson Thor AGX: Automatic Restart During NVMe Flashing Process
|
|
4 | 46 | December 25, 2025 |
|
SPI1 read issue
|
|
8 | 40 | December 25, 2025 |
|
Jetson Thor SPI to CAN module
|
|
0 | 17 | December 25, 2025 |
|
UEFI garbled text
|
|
2 | 22 | December 25, 2025 |
|
Can QSPI flash be programmed while the system is running on the Thor system?
|
|
26 | 84 | December 25, 2025 |
|
CAN communication in Jetson Thor
|
|
2 | 17 | December 25, 2025 |
|
The custom board failed to boot
|
|
1 | 19 | December 24, 2025 |
|
Why xorg take 33% of the gpu utlization?
|
|
19 | 121 | December 24, 2025 |
|
Verifying claimed TOPS performance on Jetson Thor – CUTLASS kernel for SM110 does not run, SM80 gives very low performance (~6.9 TFLOP/s)
|
|
18 | 268 | December 24, 2025 |
|
After the bootloader is updated via OTA, the content read from the relevant partitions is not completely consistent
|
|
32 | 64 | December 24, 2025 |
|
Thor realtime kernel hang
|
|
1 | 15 | December 24, 2025 |
|
PCIe link failure with FPGA on C5
|
|
11 | 117 | December 24, 2025 |
|
Jetson Thor Flashing finished Unsuccessfully
|
|
7 | 115 | December 24, 2025 |
|
SYS_VIN_HV Absolute Maximum Ratings
|
|
0 | 8 | December 24, 2025 |
|
Battery for Jetson Thor Developer's kit
|
|
5 | 196 | December 23, 2025 |
|
GPU needs to be "warmed up" to achieve maximum performance
|
|
7 | 170 | December 23, 2025 |