Hello, We have questions for the issue 2305640, which is described in the following document. https://docs.nvidia.com/jetson/l4t/pdf/Jetson_Linux_Driver_Package_Release_Notes_R32.5_GA.pdf We’re now using Jetson AGX Xavier DevKit. (In the figure of 2.1 General System Usability) Does this issue o…

[image] nomoto-y: But, this issue happens only when connecting USB type C port and in case of connecting USB type A port this issue doesn’t occur. Hi, Please go to tegra194-p2888-0001-p2822-0000-common.dtsi and also add nvidia,usb3-gen1-only= <1>; to usb3-0, usb3-2 port.

About the "CBoot USB hub support" issue for Jetson AGX Xavier DevKit

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier

nomoto-y March 4, 2021, 11:04am 4

Hi WayneWWW-san,

Thank you for your reply.
We are not using camera when device is still booting up but connecting the camera before booting up.
After booting up, the USB should enumerate the camera and work properly, right?

Best Regards,
NY

Topic		Replies	Views
CBoot with USB Storage issue Jetson Xavier NX cboot	11	1743	October 18, 2021
Boot fails when camera is plugged into usb port (Solved) Jetson AGX Xavier	21	3392	October 18, 2021
USB-C Hub Not Recognized During Boot Jetson AGX Xavier boot , usb	2	454	February 23, 2022
Issues with USB2.0 device on xavier Jetson AGX Xavier	7	1157	October 18, 2021
USB C devices defaulting to USB 2.1 speeds Jetson AGX Xavier usb	23	2008	October 18, 2021
Only one from two USB camera gets detected on boot up of JTX1 Jetson TX1	12	2026	January 6, 2017
Both USB Type C are not working Jetson AGX Xavier usb	25	1469	August 19, 2022
USB C port "crashing" Jetson AGX Xavier usb	14	1492	July 27, 2020
Basler Camera Requires Replugging After Boot to Work - Jetpack 4.4.1 (and 4.4) Jetson AGX Xavier camera , boot , hw , usb	2	1327	October 18, 2021
USB3 cameras do not initialize properly on boot Jetson AGX Xavier	2	588	October 18, 2021

About the "CBoot USB hub support" issue for Jetson AGX Xavier DevKit

Related topics