About using spi on Jetson NANO

[forumuser]

Hello, @ShaneCCC

Thank you for your support.

@ShaneCCC

Modify those pins spi1_ _ to spi1 in “nvidia,function” like below.

                         spi1_mosi_pc0 {
                                nvidia,enable-input = <0x1>;
                                nvidia,pins = "spi1_mosi_pc0";
                                nvidia,tristate = <0x0>;
                                nvidia,function = "spi1";
                                nvidia,pull = <0x1>;
                        };

Should I change not only 1 but also 2 or 3?
The kernel source contains nvidia, enable-input = <TEGRA_PIN_DISABLE>
is set to 0.

Thank you.