Hi, When I replace the image in /boot folder，my board will enter recovery mode，I have tried use the old Image，but the board will still enter recovery mode. It is a hardware problem? or I should execute a command to enter normal boot mode. xavier_boot.txt (69.1 KB)

[image] AGX Orin Recovery Boot Jetson AGX Orin Hi, Please try below method and it will go back to direct Boot again. Press ESC to enter UEFI Menu, then choose Device Manager → NVIDIA Configuration → L4T Configuration → OS chain A status → (The value is Unbootable if UEFI…

Agx xavier board always enter recovery mode，how to enter normal boot mode

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier

WayneWWW April 17, 2024, 3:33am 6

Here is the method.