Bring up Jetson AGX Orin SOM with customised carrier board

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Orin
1

How to bring up Jetson AGX orin SOM with customised carrier board without EEPROM??

2

You already answered that question by yourself.

3

I’ve tried all the ways,but unable to get the log messages …so I thought to start from beginning to bring up the som with custom board …Please guide me

4

Stop doing this on your custom board. Put your SOM to NV devkit and check if it can power up normally or not.

If it cannot, then that SOM is probably broken in hardware. If so, then what you are doing now is just wasting of time. Putting a broken SOM on your board will just lead to another broken result.

So please follow what we are telling you here.

5

We will close this topic. Just use your old topic to keep discussing.

6

Wayne, I will start with new SOM. Please guide me to bring it up. We have new custom board also.

7

ok sure

8

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.