Just a clarification in case you are not able to read your own log…
-
Your manual flash command is wrong… please directly copy and paste commands from this page.
Quick Start — NVIDIA Jetson Linux Developer Guide 1 documentation -
The flash log finally gets into correct way today. None of your previous log has any attempt to flash the board…
-
The issue is still same as post
Flashing L4T 36.2 on orin Nano/NX - #2 by WayneWWW
Your attempt to toggle the power is failed due to permission denied…
Add[ ev/nvme0n6] LUN
emovable file: (no medium)
[ 70.002362] LUN: removable file: (no medium)
/bin/nv_enable_remote.sh: line 223: /sys/bus/usb/devices/usb2/power/control0: Permission denied
[ 70.005492] usb0: HOST MAC d6:47:00:95:16:00
[ 70.005497] usb0: MAC f2:9d:18:2e:04:af
Thus, the situation I saw here is
-
Your previous try seems mostly in vain because your flash command is wrong or the flash totally didn’t happen.
-
Please just keep in this situation that the board really get into flash state, recover every software change you added back to default. Just connect a usb device like mouse or keyboard to the usb hub to make it always power on and start the flash process…