Customize Jetson Orin NX 16GB cannot boot

Hi there, I am working on custmozed Jetson Orin NX 16GB board. Recently I reflashed my board but something wired happend.
I am facing two problems now:

  1. THe Jetson board is flashed by SDK manager successfully through my Ubuntu 18.04 virtual machine. However, the device has difficulties in booting to Linux system. I double checked the boot order, my NVME ssd is in the first place. However, when I press ‘enter’ to continue boot, this board enters to UEFI shell and I have no idea how to boot from such a shell interface.

  2. I pluged in a working LAN cable to the board, and the board continues to fail both IPv4 IPv6 and other internet connection required boot options.

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.


Is your customized carrier board compatible with Orin Nano DevKit?
If it’s not, I don’t think flashing with SDK Manager works.

Please put the full booting log dumped from serial console here.