Delete sdhci@340000 SD Card node

[AliHaeri]

I see various post suggesting that sdhci@340000 is for SD card on Developer Kit. (And custom board?)

how to configure device tree parameters to get the module atwilc1000 working?

Hi rtakaki, Please check our OEM design guide to know the original pin for each sdhci controller. sdhci@3400000 was for the sdcard slot on devkit and sdhci@3440000 is for the on-module wifi/bt chip which is also a SDIO device. Thus, you could refer to the device tree of sdhci@3440000 and also the document from our kernel source. kernel/kernel-4.9/Documentation/devicetree/bindings/mmc/sdhci-tegra.txt I am not sure why you put wilc_sdio under sdhci node. For the on-module wifi chip bcm4354, w…

SD Card doesn't up on custom carrier board

The sdhci should be able to control the regulator (gpio) from software. Do you put your gpio pin to the device tree? → /t18x-common-platforms/tegra186-quill-power-tree-p3310-1000-a00-00.dtsi sdhci@3400000 { vqmmc-supply = <&spmic_ldo3>; vmmc-supply = <&en_vdd_sdcard1>; };

Beside that posts, I used 340000 and it worked!