使用的jetson Xavier industrial模块，自己做的载板，使用主板HDMI_DP1_TX0_N/P、HDMI_DP1_TX1_N/P、DDP1_AUX_CH_N/P、DP1_HPD信号，DDP1_AUX_CH_N/P、DP1_HPD信号通过电平转换芯片将上述信号转为3.3V（双向通讯）接到标准的DP座上，插上DP无显示
所用主板信号如下：
串口LOG如下：
log1.txt (114.2 KB)
Can’t see your design of DP connector side. Please refer to below DP example in DG to check your design, especially pay attention to the pin mapping.
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.