Error when flashing Orin NX using l4t_initrd_flash

[DaveYYY]

Hi,

[2024-01-22_14:17:29:301]modprobe: ERROR: could not insert ‘tegra_mce’: Exec format error
[2024-01-22_14:17:29:320]9968] spi_tegra210_quad: disagrees about version of symbol module_layout

I don’t believe you are doing it right.
Please also check this post:

Can't boot orin nx after flashing custom Kernel

Hi, This is a known issue on JetPack 6 with kernel building. We are tracking it internally. This is because we need separate kernel drivers to mount NVMe/USB as rootfs during booting, and these drivers has to be present in the initrd image. However, when you build kernel/kernel modules, the initrd image is not updated, so the value of module_layout in kernel modules in the stock initrd image released by NVIDIA does not match the new kernel image you built yourself. For a temporary solution, …