Flash error - takes a very long time ([1012.4253] tegracm_v2 --chip 0x230 --ismb2)

Autonomous Machines Jetson & Embedded Systems Jetson Orin Nano
1

Hi,
to change the eufi logo to the desired image, the build was successful by referring to the following page.

UEFI Adaptation — Jetson Linux Developer Guide documentation

And I used the following command to flash to the orin.

sudo ./flash.sh -r -k cpu-bootloader jetson-orin-nano-devkit nvme0n1p1

I’ve tried a few times, but it takes a lot of time on certain sections. May I know the problem and how to fix it?

This is the log…

[ 7.8304 ] blobsize is 27073376
[ 7.8305 ] Added binary blob_uefi_jetson_with_dtb_sigheader.bin.encrypt of size 6971456
[ 7.8517 ] Added binary blob_pscfw_t234_prod_sigheader.bin.encrypt of size 310768
[ 7.8553 ] Added binary blob_mce_flash_o10_cr_prod_sigheader.bin.encrypt of size 187120
[ 7.8560 ] Added binary blob_tsec_t234_sigheader.bin.encrypt of size 176128
[ 7.8565 ] Added binary blob_applet_t234_sigheader.bin.encrypt of size 279616
[ 7.8572 ] Not supported type: mb2_applet
[ 7.8575 ] Added binary blob_mb2_t234_with_mb2_bct_MB2_sigheader.bin.encrypt of size 439968
[ 7.8583 ] Added binary blob_xusb_t234_prod_sigheader.bin.encrypt of size 164864
[ 7.8590 ] Added binary blob_nvpva_020_sigheader.fw.encrypt of size 2164640
[ 7.8615 ] Added binary blob_display-t234-dce_with_kernel_tegra234-p3768-0000+p3767-0004-nv_sigheader.bin.encrypt of size 12065152
[ 7.8749 ] Added binary blob_nvdec_t234_prod_sigheader.fw.encrypt of size 294912
[ 7.8770 ] Added binary blob_bpmp_t234-TE950M-A1_prod_sigheader.bin.encrypt of size 1027008
[ 7.8783 ] Added binary blob_tegra234-bpmp-3767-0004-3509-a02_with_odm_sigheader.dtb.encrypt of size 204672
[ 7.8790 ] Added binary blob_camera-rtcpu-t234-rce_sigheader.img.encrypt of size 458096
[ 7.8798 ] Added binary blob_adsp-fw_sigheader.bin.encrypt of size 414960
[ 7.8804 ] Added binary blob_spe_t234_sigheader.bin.encrypt of size 270336
[ 7.8810 ] Added binary blob_tos-optee_t234_sigheader.img.encrypt of size 1633344
[ 7.8826 ] Added binary blob_eks_t234_sigheader.img.encrypt of size 9232
[ 7.9208 ] Sending membct and RCM blob
[ 7.9213 ] tegrarcm_v2 --chip 0x23 0 --pollbl --download bct_mem mem_rcm_sigheader.bct.encrypt --download blob blob.bin
[ 7.9231 ] BL: version 1.4.0.2-t234-54845784-08a4de08 last_boot_error: 0
[ 8.0220 ] Sending bct_mem
[ 8.1193 ] Sending blob
[ 10.8631 ] completed
[ 11.8653 ] tegrarcm_v2 --chip 0x23 0 --ismb2applet
[ 1012.4253 ] tegrarcm_v2 --chip 0x23 0 --ismb2

3

Hi,

Could you please provide the complete flash log and the UART log captured during the flashing process?
To obtain the UART log, please refer to the relevant instructions.

Thanks

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.