Hello, we tried to flash jetson orin nx 8gb SOM using the orin nano developer kit.But the flash fails with the following error. [Screenshot from 2024-05-21 18-38-37] We also tried flashing with SDK Manager (JETPACK 6.0) but still it fails.Herewith i have attached the logs of both SDK manager and …

The EEPROM is corrupted. Find the Linux_for_Tegra folder on your host PC, and do sudo BOARDID=3767 BOARDSKU=0001 FAB=300 \ ./tools/kernel_flash/l4t_initrd_flash.sh --external-device nvme0n1p1 \ -c tools/kernel_flash/flash_l4t_t234_nvme.xml -p “-c bootloader/generic/cfg/flash_t234_qspi.xml” \ –…

Hi, I have seen this error in the past. In my case the USB timeout was causing the port to go to sleep. Remove the timeout and reboot: sudo sed -i 's/GRUB_CMDLINE_LINUX_DEFAULT="[a-z ]*/& usbcore.autosuspend=-1/' \ /etc/default/grub sudo update-grub2 reboot I also had to disable ufw because i…

Hi, Thankyou @miguel.taylor for your valuable input.But the issue we are facing is related to EEPROM read failure and not USB timeout error.

Hi, In my case, I was getting the exact same EEPROM read error, which was caused by the USB timeout. I think it is a common issue on Ubuntu 20.04. You can also try the solution from this post , which involves skipping the EEPROM read and setting the values manually, but in my case, it didn’t help. …

Hi, I have tried the solution given, but the issue is not resolved.I am getting the same EEPROM error.

Are you using VM or host PC with Ubuntu OS?

I am using host PC with Ubuntu OS(version:22.04.3)

[image] DaveYYY: The EEPROM is corrupted. I am getting the below error , when I execute the initrd.sh flash command to flash as shown below. Is EEPROM of my orion NX 16 GB SOM is also corrupt? /home/trident/Downloads/r36_3_0/Linux_for_Tegra/tools/kernel_flash/l4t_initrd_flash_internal.sh --…

That means the deivce is not even detected to be in force recovery mode.

Thankyou @DaveYYY @kayccc The issue has been solved .

[image] DaveYYY: That means the deivce is not even detected to be in force recovery mode. But we see, it list “NVidia Corp” when we run lsusb command…

Flashing L4T35.4.1 to orin nx 8GB SOM fails

Robotics & Edge Computing Jetson Systems Jetson Orin NX

DaveYYY June 11, 2024, 8:06am 16

@nagesh_accord
Please don’t mix up unrelated things in other people’s posts.
Your issue should be handled here:

Topic		Replies	Views
Intermittent Flashing failure in orin nx Jetson Orin NX reflash , board-design	13	282	March 13, 2026
Flashing Orin NX stops in Step 3 (waiting for tartget to boot-up) and time out Jetson Orin NX reflash , board-design	2	475	April 23, 2024
USB timeout by flashing Orin NX 8GB Jetson Orin NX reflash	2	439	April 19, 2024
Issue with "Waiting for target to boot-up..." Error while Flashing Jetson Orin NX Jetson Orin NX kernel , flash	38	4060	July 3, 2024
Jetson Orin NX - Device failed to boot to the initrd flash kernel - L4T36.3.0 Jetson Orin NX reflash , board-design	2	878	June 28, 2024
Flashing Error in Jetpack 5.1.3 with Orin NX Jetson Orin NX reflash , board-design	1	344	March 15, 2024
Cannot flash Jetson Nano Orin devkit, eeprom error Jetson Orin Nano boot , reflash	7	1593	January 20, 2024
Orin nx 8G flash failure Jetson Orin NX reflash	13	356	March 28, 2025
Orin NX Flashing Issue Jetson Orin NX reflash , board-design	2	847	March 15, 2023
Error when flashing Orin NX using l4t_initrd_flash Jetson Orin NX reflash	15	1628	January 25, 2024

Flashing L4T35.4.1 to orin nx 8GB SOM fails

Related topics