We follow Xavier AGX B03 schematic do a new board ,but it need to remove C543 4.7uF , the CARRIER_PWR_ON can be work, then the 3.3V and 1.8V is normal, but it still not signal at UART3_TX_DEBUG , we just change transistor

I get the solution， the about change Q513 need to change C543 and R559 not only change C543

Follow Xavier AGX B03 schematic ,need to remove C543 4.7uF , the CARRIER_PWR_ON can be work

Tony_Li July 8, 2021, 1:49am 5

Topic		Replies	Views
Flashing Jetson AGX Xavier with Jetson Linux 34.1.0 or newer fails with custom carrier board Jetson AGX Xavier hw , reflash , board-design	7	759	April 26, 2023
Jetson Xavier AGX SoM Custom board design Announcements board-design	5	1649	October 12, 2021
Please help to confirm fail at what device Jetson AGX Xavier board-design	60	3038	October 18, 2021
Xavier flashing hangs at tegrarcm_v2 –isapplet with JetPack_5.0_DP Jetson AGX Xavier reflash , usb , nvbugs	54	7517	April 22, 2022
Xavier NX on custom board, stuck at tegrarcm_v2 --isapplet Jetson Xavier NX boot , board-design	26	1516	June 12, 2023
AGX Xavier error during flashing Jetson AGX Xavier reflash	17	2483	October 18, 2021
Why the firmware doesn't works on the carrier board of jetson agx Jetson AGX Xavier power-on	13	862	March 7, 2023
Xavier4.3, How can I debug with ttyTSH0 instead of ttyTCU0? Jetson AGX Xavier uart , nvbugs	46	3743	November 10, 2021
XAVIER no operating issue Jetson AGX Xavier hw	11	791	October 18, 2021
Differentiate between HW Revs of Xaviers Jetson AGX Xavier hw	21	1465	January 4, 2023