HDMI related register adjustment

[ken.oka]

Thank you for answering

Is it possible that this is related to not applying the patch fix described in section 4.2.3 of “NVIDIA Jetson Linux Release Notes Version 35.4.1 GA”?

AGX Orin Display issue with 4K HDMI

We did below change in Orin NX and HDMI is working but we do not have an option in AGX Orin, can you specify what dtb and pinmux needs to be used if HDMI to be enabled? here in AGX Orin we used flash script with config file as below: sudo ./flash.sh jetson-agx-orin-devkit mmcblk0p1 Edited the below mentioned file: /Linux_for_Tegra/jetson-orin-nano-devkit.conf Change PINMUX_CONFIG,PMC_CONFIG,DTB_FILE Change below lines DEFAULT_EMC_FUSE=“0”; PINMUX_CONFIG=“tegra234-mb1-bct-pinmux-p3767-dp-…

This is related to the answer above. Please tell me the specific parameters to set it to HDMI mode.