Hope to get technical guidance,Use the KSZ9896 PHY to replace the Jetson-AGX-Xavier PHY driver via the MDIO interface

[WayneWWW]

And for ksz9896 phy, some other users had shared their experience.

Replace PHY on microchip switch KSZ9896

Hi! I’m trying to use KSZ9896 as PHY on Jetson Xavier custom board. What should I do to bring up ethernet on my board. Do I need KSZ9896 drivers or I can use default drivers and just config device tree? KSZ9896 connected over RGMII interface on port 6 and MDIO bus.