Hi, everyone, I used Xavier NX devkit with R35.3.1. But I met a boot kernel ops while using, it looks like the same situation in [image] R35.2.1 Xavier NX tegra194_cbb_err_isr Jetson Xavier NX We upgraded the L4T version to R35.3.1, however it still occasionally starts Oop…

please refer to this patch. [image] Xavier NX can not boot with L4T35.4.1 Jetson Xavier NX please apply this patch. diff --git a/drivers/soc/tegra/powergate-bpmp.c b/drivers/soc/tegra/powergate-bpmp.c index 06c792b..5e17731 100644 --- a/drivers/soc/tegra/powergate-bpmp.c…

I2C-8 bus missing in Xavier NX devkit board

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX

ShaneCCC December 7, 2023, 6:11am 5

Doesn’t looks like remove that was the solution for that.
Please using the J5.0.2 UEFI for the kernel oops.

Topic		Replies	Views
Xavier NX: I2C1 access from bootloader Jetson Xavier NX nvbugs , i2c	5	1109	March 10, 2021
Can not find i2c-8 Orin NX(P3767-0000) Jetson Orin NX i2c	12	235	June 3, 2024
I2C4 and I2C6 Jetson AGX Xavier i2c	9	671	September 25, 2023
R35.2.1 Xavier NX tegra194_cbb_err_isr Jetson Xavier NX boot , kernel	15	1269	July 12, 2023
TX2 use i2c4 (dp1_aux_ch) Jetson TX2 i2c	7	3047	December 17, 2020
Dmesg log：no acknowledge from address ，but i2c device work normal Jetson Xavier NX i2c	19	1546	April 27, 2023
Xavier NX Dev Kit booting problem (most likely because of I2C bus) Jetson Xavier NX boot , i2c	14	1017	October 12, 2022
Configure DP-AUX0 and DP-AUX1 as I2C Jetson Xavier NX i2c	4	1065	November 29, 2021
Controller I2C4 (I2C bus 3) stuck with I2C tools Jetson AGX Xavier	2	829	August 17, 2022
Xavier NX i2c-1 err Jetson Xavier NX board-design , i2c	3	31	March 12, 2025

I2C-8 bus missing in Xavier NX devkit board

Related topics