The imx219 camera that used to work well doesn’t work.
The same goes if you reinstall the OS or change the SD card to another.
The camera also checked the connections and changed the cable to a new one, but it does not recognize it as shown below.
May 3 15:52:37 nano kernel: [ 1.329336] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
May 3 15:52:37 nano kernel: [ 1.338707] extcon-disp-state extcon:disp-state: cable 47 state 0
May 3 15:52:37 nano kernel: [ 1.338710] Extcon AUX1(HDMI) disable
May 3 15:52:37 nano kernel: [ 1.352628] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
May 3 15:52:37 nano kernel: [ 1.352706] imx219 7-0010: imx219_board_setup: error during i2c read probe (-121)
May 3 15:52:37 nano kernel: [ 1.352772] imx219 7-0010: board setup failed
May 3 15:52:37 nano kernel: [ 1.352822] imx219: probe of 7-0010 failed with error -121
May 3 15:52:37 nano kernel: [ 1.353297] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
May 3 15:52:37 nano kernel: [ 1.370643] tegradc tegradc.0: unblank
May 3 15:52:37 nano kernel: [ 1.376595] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
May 3 15:52:37 nano kernel: [ 1.376679] imx219 8-0010: imx219_board_setup: error during i2c read probe (-121)
May 3 15:52:37 nano kernel: [ 1.376780] imx219 8-0010: board setup failed
May 3 15:52:37 nano kernel: [ 1.376854] imx219: probe of 8-0010 failed with error -121