我看这个链接里是把UPHY-T/Rx接到type-a上，最终是能使用的。但是在JAO开发套件的底板上，这路信号是接到type-c上的。而且在JAX也是这个情况（我们现在有个底板就是使用的JAX开发板的usbtype-c信号直连到type-a，最终实测是可以使用的，使用默认系统）
所以这块到底是什么限制？这块能出一个说明么
gucj
4
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| AGX ORIN usb3.0 does not work or is recognized as 2.0 on USB1 | 3 | 273 | July 30, 2024 | |
| Orin usb3.0 type A not working for custom carrier board USB | 19 | 237 | July 8, 2026 | |
| Orin USB0 and UPHY_TX1/RX1 not working connect to Type A connector | 8 | 1061 | December 19, 2022 | |
| ORIN The pairing relationship between USB 2.0 and USB 3.0 | 2 | 114 | June 17, 2026 | |
| AGX ORIN 32G在JETPACK5.1.5上USB只能识别到USB2.0 | 10 | 225 | October 30, 2025 | |
| USB3.1 microAB | 1 | 89 | January 22, 2025 | |
| USB type-a接口在自制载板上不工作 | 26 | 398 | December 15, 2025 | |
| USB0 not working at ORIN AGX | 9 | 632 | November 13, 2023 | |
| AGX Orin使用lsusb无法识别USB | 27 | 1161 | October 17, 2024 | |
| AGX Orin industrial Usb3.0 not working | 7 | 282 | March 24, 2025 |