请问，JAO是否也可以按照下图JAX一样设计USB3.1 microAB接口，然后在推荐使用哪些pin？
我目前使用的是UPHY_T/RX20_P/N, GP46_USB_VBUS_EN1, 然后对于ID和vbus监测信号不知道用哪个管脚。
还有就是是否需要更改设备树和驱动？
感谢
gucj
1
Trumany
4
Please refer to Orin Design Guide doc for USB design.
Jetson AGX Orin Series Design Guide (including AGX Orin Industrial)
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| 关于JAO的USB3.0接口问题 | 4 | 240 | January 3, 2025 | |
| Agx orin usb | 6 | 313 | October 15, 2024 | |
| AGX ORIN 32G由Jetpack5.1.3升级到6.2后 USB不能用了 | 4 | 294 | August 6, 2025 | |
| AGX Orin使用lsusb无法识别USB | 27 | 1161 | October 17, 2024 | |
| Custom board usb detection issue in jetson agx orin | 58 | 1145 | February 19, 2025 | |
| Agx orin jetpack6.2.1 usb not work, include type c for download system image and usb3, please help me! | 6 | 253 | August 1, 2025 | |
| Direct USB 3.0 on jetson AGX ORING [no hub] | 7 | 265 | February 3, 2026 | |
| USB3.0只能识别到USB2.0 | 5 | 305 | April 9, 2025 | |
| Jetson AGX Orin industrial usb cannot use with myself carried board | 20 | 303 | July 7, 2026 | |
| ID pin in USB 3.1 Micro AB port for Software Deployment | 1 | 604 | June 6, 2019 |