Jetson Agx Orin 關閉boot log 開機異常

[oxoilp258]

How to close the terminal image when booting

There are 2 methods to remove frame buffer: 1. Disable kernel config CONFIG_FRAMEBUFFER_CONSOLE 1-1: check the result of the following command zcat /proc/config.gz |grep FRAMEBUFFER_CONSOLE 1-2: If the above config exists, then disable it in defconfig 2. Remove console=tty0 in kernel command line 2-1: check current kernel command line $cat /proc/cmdline 2-2: If console=tty0 in kernel command line, then remove it in p3668.conf.common

我有將CONFIG_FRAMEBUFFER_CONSOLE 註解掉，但build出來還是被設起來