Jetson Blank Screen After initial Nvidia Logo boot

Robotics & Edge Computing Jetson Systems Jetson Nano
1

Before trying to reflash Jetson

do few sanity checks

  1. Check if its in recovery mode

  2. Connect to a host machine with usb c or micro B and turn on jetson, from host machine run lsusb and check if Jetson is listing as Nvidia. Further debugging steps has been answered from nvidia team in earlier forums

  3. MY SOLUTION: Under Boot Maintenance Manager – increase the Auto Boot Timeout from 5 sec to 20sec
    In my case it did helped. I have verified this with two Agx Orin devices. Though currently i dont have a better reasoning about this. A time period of 20 sec is suffice for jetson to load ubuntu i guess. If someone has better idea on this , please do share

2

Before all the above steps, A very simple initial check should be remove the DP display port connector from Jetson and connect again

In most cases this should help

3

Thanks for your sharing to the community!

4

I foundthat removing and connecting the display cable 1 or 2 or sometime 3 times works most of times , and I think changing auto boot time has no role.

5

It was just a converter issue, buy any branded DP port to HDMI converter and it works