Hi, I have built over 20 devices using the Jetson Nano and we found that one unit is switching off when ambient temperature is around 40oC. The other units can perform without issues up to ambient temperature of 50oC. For the unit with this failure I replaced the heat sink for a new one, but still…

Hi, I only saw a cooling state change in your log. [ 4239.099217] hot-surface-alert cooling state: 0 → 1 Is this log based on UART console or you dumped it in later reboot? For example, the log is dumped in next boot after previous crash.

Jetson nano temperature issues

Autonomous Machines Jetson & Embedded Systems Jetson Nano

Robert_Crovella December 9, 2023, 12:21am 2

These: 1 2 3 may be of interest.

Topic		Replies	Views
Jetson nano in low temperature Jetson Nano hw , board-design	9	424	February 7, 2023
Overheating shut down - Jetson Nano Jetson Nano	4	4967	October 15, 2021
Nano shutting down under load (overheating) Jetson Nano hw , power	8	782	October 18, 2021
Jetson nano cold temperatures (Operation, storage) Jetson Nano hw	3	529	December 1, 2021
Jetson Nano DevKit Reboots when overheating Jetson Nano thermal	6	1888	October 18, 2021
Control Jetson Nano's temperature Jetson Nano thermal	3	921	October 15, 2021
Intentionally throttling my Jetson Nano Jetson Nano	3	360	October 25, 2023
Jetson Nano halts at 75 degrees CPU Jetson Nano thermal	4	842	October 18, 2021
Jetson nano turn off on random time Jetson Nano fan-facts	6	1286	August 15, 2022
Thermal issues on Jetson Nano Jetson Nano thermal	3	707	October 18, 2021

Jetson nano temperature issues

Related topics