Jetson Orin Nano 8GB black screen after boot

Hello,

I am encountering an issue with an Orin Nano 8GB running JetPack 5.1.1 on a custom board. I have connected a Full HD Display (ACER B233HU) to the Display Port of the carrier board.

Upon powering on the device, the UEFI Screen with the NVIDIA logo is displayed. However, after that, the screen goes black and I am unable to see any further output.

I can establish a connection to the Orin Nano over the USB interface, and once the initial configuration is complete, I can access it via SSH. This indicates that the device boots up properly.

I added a screenshot and video.

Dmesg output

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd421]
[    0.000000] Linux version 5.10.104-tegra (buildbrain@mobile-u64-6289-d7000) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.08) 9.3.0, GNU ld (GNU Binutils) 2.33.1) #1 SMP PREEMPT Sun Mar 19 07:55:28 PDT 2023
[    0.000000] OF: fdt: memory scan node memory@80000000, reg size 16,
[    0.000000] OF: fdt:  - 80000000 ,  c0000000
[    0.000000] Machine model: NVIDIA Orin Nano Developer Kit
[    0.000000] efi: EFI v2.70 by EDK II
[    0.000000] efi: RTPROP=0x25f4f9a98 SMBIOS=0xffff0000 SMBIOS 3.0=0x2412f0000 MEMATTR=0x24007f018 ESRT=0x240ea2018 RNG=0x264536c18 MEMRESERVE=0x240088c18 
[    0.000000] efi: seeding entropy pool
[    0.000000] esrt: Reserving ESRT space from 0x0000000240ea2018 to 0x0000000240ea2050.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000254400000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000fffdffff]
[    0.000000]   node   0: [mem 0x00000000fffe0000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023bffffff]
[    0.000000]   node   0: [mem 0x000000023c000000-0x000000023e1bffff]
[    0.000000]   node   0: [mem 0x000000023e1c0000-0x000000023ff9ffff]
[    0.000000]   node   0: [mem 0x000000023ffa0000-0x000000024006ffff]
[    0.000000]   node   0: [mem 0x0000000240070000-0x000000024008ffff]
[    0.000000]   node   0: [mem 0x0000000240090000-0x00000002400affff]
[    0.000000]   node   0: [mem 0x00000002400b0000-0x0000000240d26fff]
[    0.000000]   node   0: [mem 0x0000000240d27000-0x0000000240e88fff]
[    0.000000]   node   0: [mem 0x0000000240e89000-0x00000002412dffff]
[    0.000000]   node   0: [mem 0x00000002412e0000-0x00000002412fffff]
[    0.000000]   node   0: [mem 0x0000000241300000-0x000000024160ffff]
[    0.000000]   node   0: [mem 0x0000000241610000-0x000000024165ffff]
[    0.000000]   node   0: [mem 0x0000000241660000-0x000000024181ffff]
[    0.000000]   node   0: [mem 0x0000000241820000-0x00000002419fffff]
[    0.000000]   node   0: [mem 0x0000000241a00000-0x0000000241a8ffff]
[    0.000000]   node   0: [mem 0x0000000241a90000-0x0000000241c6ffff]
[    0.000000]   node   0: [mem 0x0000000241c70000-0x0000000241ccffff]
[    0.000000]   node   0: [mem 0x0000000241cd0000-0x0000000241dbffff]
[    0.000000]   node   0: [mem 0x0000000241dc0000-0x0000000241deffff]
[    0.000000]   node   0: [mem 0x0000000241df0000-0x0000000241dfffff]
[    0.000000]   node   0: [mem 0x0000000241e00000-0x0000000241eaffff]
[    0.000000]   node   0: [mem 0x0000000241eb0000-0x0000000241f4ffff]
[    0.000000]   node   0: [mem 0x0000000241f50000-0x000000024204ffff]
[    0.000000]   node   0: [mem 0x0000000242050000-0x00000002420effff]
[    0.000000]   node   0: [mem 0x00000002420f0000-0x00000002421effff]
[    0.000000]   node   0: [mem 0x00000002421f0000-0x000000024228ffff]
[    0.000000]   node   0: [mem 0x0000000242290000-0x0000000242b5ffff]
[    0.000000]   node   0: [mem 0x0000000242b60000-0x0000000242d3ffff]
[    0.000000]   node   0: [mem 0x0000000242d40000-0x00000002644effff]
[    0.000000]   node   0: [mem 0x00000002644f0000-0x000000026453ffff]
[    0.000000]   node   0: [mem 0x0000000264540000-0x0000000267ffffff]
[    0.000000]   node   0: [mem 0x0000000268200000-0x000000026860ffff]
[    0.000000]   node   0: [mem 0x000000026e000000-0x000000026fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000026fffffff]
[    0.000000] On node 0 totalpages: 2008080
[    0.000000]   DMA zone: 8192 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 524288 pages, LIFO batch:63
[    0.000000]   Normal zone: 23552 pages used for memmap
[    0.000000]   Normal zone: 1483792 pages, LIFO batch:63
[    0.000000] On node 0, zone Normal: 496 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 32 pages/cpu s90200 r8192 d32680 u131072
[    0.000000] pcpu-alloc: s90200 r8192 d32680 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] alternatives: patching kernel code
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1976336
[    0.000000] Kernel command line: root=PARTUUID=df5b9347-ea46-4dfd-a8b6-d5d743021bcb rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nv-auto-config 
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000effe0000-0x00000000fffe0000] (256MB)
[    0.000000] Memory: 7237576K/8032320K available (18496K kernel code, 3168K rwdata, 7172K rodata, 3968K init, 1418K bss, 532600K reserved, 262144K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x38/0x420 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 960 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000f440000
[    0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:608, num:70)
[    0.000000] GICv2m: range[mem 0x0f410000-0x0f41ffff], SPI[608:677]
[    0.000000] arch_timer: cp15 timer(s) running at 31.25MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
[    0.000004] sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
[    0.000677] Console: colour dummy device 80x25
[    0.000720] Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
[    0.000728] pid_max: default: 32768 minimum: 301
[    0.000793] LSM: Security Framework initializing
[    0.000815] Yama: becoming mindful.
[    0.000834] SELinux:  Initializing.
[    0.000895] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000909] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001632] /cpus/cpu-map/cluster1: empty cluster
[    0.001931] rcu: Hierarchical SRCU implementation.
[    0.002017] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.002421] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/p3768/kernel-dts/tegra234-p3767-0003-p3768-0000-a0.dts
[    0.002425] DTB Build time: Mar 19 2023 08:08:40
[    0.003701] Tegra Revision: A01 SKU: 0xd5 CPU Process: 0 SoC Process: 0
[    0.003922] Remapping and enabling EFI services.
[    0.005106] smp: Bringing up secondary CPUs ...
[    0.033804] Detected PIPT I-cache on CPU1
[    0.033838] GICv3: CPU1: found redistributor 100 region 0:0x000000000f460000
[    0.033864] CPU1: Booted secondary processor 0x0000000100 [0x410fd421]
[    0.062509] Detected PIPT I-cache on CPU2
[    0.062519] GICv3: CPU2: found redistributor 200 region 0:0x000000000f480000
[    0.062533] CPU2: Booted secondary processor 0x0000000200 [0x410fd421]
[    0.091141] Detected PIPT I-cache on CPU3
[    0.091149] GICv3: CPU3: found redistributor 300 region 0:0x000000000f4a0000
[    0.091164] CPU3: Booted secondary processor 0x0000000300 [0x410fd421]
[    0.121822] Detected PIPT I-cache on CPU4
[    0.121846] GICv3: CPU4: found redistributor 10200 region 0:0x000000000f500000
[    0.121876] CPU4: Booted secondary processor 0x0000010200 [0x410fd421]
[    0.150576] Detected PIPT I-cache on CPU5
[    0.150588] GICv3: CPU5: found redistributor 10300 region 0:0x000000000f520000
[    0.150604] CPU5: Booted secondary processor 0x0000010300 [0x410fd421]
[    0.150668] smp: Brought up 1 node, 6 CPUs
[    0.150682] SMP: Total of 6 processors activated.
[    0.150686] CPU features: detected: Privileged Access Never
[    0.150687] CPU features: detected: LSE atomic instructions
[    0.150689] CPU features: detected: User Access Override
[    0.150691] CPU features: detected: 32-bit EL0 Support
[    0.150694] CPU features: detected: Common not Private translations
[    0.150696] CPU features: detected: RAS Extension Support
[    0.150697] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.150699] CPU features: detected: CRC32 instructions
[    0.150701] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.189217] CPU: All CPU(s) started at EL2
[    0.190980] devtmpfs: initialized
[    0.207886] Registered cp15_barrier emulation handler
[    0.207896] Registered setend emulation handler
[    0.207902] KASLR enabled
[    0.208055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.208068] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.210049] pinctrl core: initialized pinctrl subsystem
[    0.210601] SMBIOS 3.0.0 present.
[    0.210610] DMI: Unknown NVIDIA Orin Nano Developer Kit/NVIDIA Orin Nano Developer Kit, BIOS 3.1-32827747 03/19/2023
[    0.210888] NET: Registered protocol family 16
[    0.211795] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.211861] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.211917] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.211943] audit: initializing netlink subsys (disabled)
[    0.212044] audit: type=2000 audit(0.212:1): state=initialized audit_enabled=0 res=1
[    0.212235] thermal_sys: Registered thermal governor 'step_wise'
[    0.212238] thermal_sys: Registered thermal governor 'power_allocator'
[    0.212241] thermal_sys: Registered thermal governor 'pid_thermal_gov'
[    0.213095] cpuidle: using governor menu
[    0.213225] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.213300] ASID allocator initialised with 32768 entries
[    0.213402] Serial: AMBA PL011 UART driver
[    0.215321] tegra234_mc_sid_probe(): tegra234 mc-sid probe successful
[    0.215346] Tegra reboot handler registered.
[    0.236773] mc: mapped MMIO address: 0xffff8000107b0000 -> 0x2c10000
[    0.236786] mc: mapped MMIO address: 0xffff8000107d0000 -> 0x2c20000
[    0.236794] mc: mapped MMIO address: 0xffff8000107f0000 -> 0x2c30000
[    0.236803] mc: mapped MMIO address: 0xffff800010810000 -> 0x2c40000
[    0.236810] mc: mapped MMIO address: 0xffff800010830000 -> 0x2c50000
[    0.236817] mc: mapped MMIO address: 0xffff800010850000 -> 0x2b80000
[    0.236823] mc: mapped MMIO address: 0xffff800010870000 -> 0x2b90000
[    0.236829] mc: mapped MMIO address: 0xffff800010890000 -> 0x2ba0000
[    0.236835] mc: mapped MMIO address: 0xffff8000108b0000 -> 0x2bb0000
[    0.236841] mc: mapped MMIO address: 0xffff8000108d0000 -> 0x1700000
[    0.236848] mc: mapped MMIO address: 0xffff8000108f0000 -> 0x1710000
[    0.236855] mc: mapped MMIO address: 0xffff800010910000 -> 0x1720000
[    0.236862] mc: mapped MMIO address: 0xffff800010930000 -> 0x1730000
[    0.236869] mc: mapped MMIO address: 0xffff800010950000 -> 0x1740000
[    0.236875] mc: mapped MMIO address: 0xffff800010970000 -> 0x1750000
[    0.236881] mc: mapped MMIO address: 0xffff800010990000 -> 0x1760000
[    0.236887] mc: mapped MMIO address: 0xffff8000109b0000 -> 0x1770000
[    0.236896] nv-tegra-mc 2c10000.mc: No mssnvlink node
[    0.236913] mc-err: mcerr ops are set to t23x
[    0.237664] 31d0000.serial: ttyAMA0 at MMIO 0x31d0000 (irq = 65, base_baud = 0) is a SBSA
[    1.381997] printk: console [ttyAMA0] enabled
[    1.390879] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.397586] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    1.404287] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.410985] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.419576] ACPI: Interpreter disabled.
[    1.423886] ddr-vddq: supplied by vdd-5v
[    1.428000] ddr-vdd2: supplied by vdd-5v
[    1.432058] vdd-AO-1v2: supplied by vdd-5v
[    1.436290] vdd-3v3: supplied by vdd-5v
[    1.440336] vdd-rtc: supplied by vdd-AO-1v2
[    1.444644] vdd-0v95-uphy: supplied by vdd-AO-1v2
[    1.449480] vdd-0v95-hdmi: supplied by vdd-AO-1v2
[    1.454460] vdd-1v8: supplied by vdd-3v3-sys
[    1.458848] vdd-3v3-AO: supplied by vdd-5v-sys
[    1.463405] vdd-av10-hub: supplied by vdd-5v-sys
[    1.468156] vdd-vbus-a: supplied by vdd-5v-sys
[    1.472717] vdd-vbus-b: supplied by vdd-5v-sys
[    1.477287] vdd-3v3-dp: supplied by vdd-3v3-sys
[    1.482106] iommu: Default domain type: Translated 
[    1.487019] eventlib_kernel: keventlib is initialized, test id: 0
[    1.493311] SCSI subsystem initialized
[    1.497146] usbcore: registered new interface driver usbfs
[    1.502644] usbcore: registered new interface driver hub
[    1.507968] usbcore: registered new device driver usb
[    1.513234] mc: Linux media interface: v0.10
[    1.517512] videodev: Linux video capture interface: v2.00
[    1.523175] pps_core: LinuxPPS API ver. 1 registered
[    1.528138] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.537279] PTP clock support registered
[    1.541447] tegra_wdt_t18x 2190000.watchdog: Tegra WDT init timeout = 120 sec
[    1.548602] tegra_wdt_t18x 2190000.watchdog: Registered successfully
[    1.556307] Registered efivars operations
[    1.560871] FPGA manager framework
[    1.564309] Advanced Linux Sound Architecture Driver Initialized.
[    1.570686] Bluetooth: Core ver 2.22
[    1.574269] NET: Registered protocol family 31
[    1.578712] Bluetooth: HCI device and connection manager initialized
[    1.585069] Bluetooth: HCI socket layer initialized
[    1.589946] Bluetooth: L2CAP socket layer initialized
[    1.595004] Bluetooth: SCO socket layer initialized
[    1.600431] camchar: rtcpu character device driver loaded
[    1.606072] clocksource: Switched to clocksource arch_sys_counter
[    1.819321] VFS: Disk quotas dquot_6.6.0
[    1.823284] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.830324] pnp: PnP ACPI: disabled
[    1.836095] la/ptsa driver initialized.
[    1.839990] NET: Registered protocol family 2
[    1.844482] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.853578] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.862127] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.870120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.878032] TCP: Hash tables configured (established 65536 bind 65536)
[    1.884632] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.891443] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.898745] NET: Registered protocol family 1
[    1.903317] RPC: Registered named UNIX socket transport module.
[    1.909243] RPC: Registered udp transport module.
[    1.913953] RPC: Registered tcp transport module.
[    1.918656] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.925102] PCI: CLS 0 bytes, default 64
[    1.929131] Trying to unpack rootfs image as initramfs...
[    2.091297] Freeing initrd memory: 9120K
[    2.097441] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.105366] kvm [1]: IPA Size Limit: 48 bits
[    2.109688] kvm [1]: GICv3: no GICV resource entry
[    2.114482] kvm [1]: disabling GICv2 emulation
[    2.118943] kvm [1]: GIC system register CPU interface enabled
[    2.124839] kvm [1]: vgic interrupt IRQ9
[    2.128870] kvm [1]: VHE mode initialized successfully
[    2.134714] Initialise system trusted keyrings
[    2.139242] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.148227] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.154390] NFS: Registering the id_resolver key type
[    2.159453] Key type id_resolver registered
[    2.163640] Key type id_legacy registered
[    2.167682] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    2.174388] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    2.181793] ntfs: driver 2.1.32 [Flags: R/W].
[    2.201390] NET: Registered protocol family 38
[    2.205837] Key type asymmetric registered
[    2.209933] Asymmetric key parser 'x509' registered
[    2.214830] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[    2.222284] io scheduler mq-deadline registered
[    2.226816] io scheduler kyber registered
[    2.235190] tegra-pwm 3280000.pwm: PWM clk can sleep in ops
[    2.240795] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
[    2.246385] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
[    2.252840] efifb: probing for efifb
[    2.256446] efifb: framebuffer at 0x23c000000, using 8640k, total 8640k
[    2.263070] efifb: mode is 1920x1080x32, linelength=8192, pages=1
[    2.269165] efifb: scrolling: redraw
[    2.272737] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.282116] Console: switching to colour frame buffer device 240x67
[    2.291942] fb0: EFI VGA frame buffer device
[    2.298153] tegra_dc_assign_hw_data: no matching compatible node
[    2.304163] tegradccommon module_init failed
[    2.308431] tegradc module_init failed
[    2.312472] EINJ: ACPI disabled.
[    2.317456] tegra-pmc c360000.pmc: scratch reg offset dts data not present
[    2.324337] tegra-pmc: ### PMC reset source: SYS_RESET_N
[    2.329649] tegra-pmc: ### PMC reset level: L0
[    2.334088] tegra-pmc: ### PMC reset status reg: 0x0
[    2.340486] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.787756] random: fast init done
[    3.957232] printk: console [ttyTCU0] enabled
[    3.962328] arm-smmu 12000000.iommu: probing hardware configuration...
[    3.969026] arm-smmu 12000000.iommu: SMMUv2 with:
[    3.973849] arm-smmu 12000000.iommu: 	stage 1 translation
[    3.979393] arm-smmu 12000000.iommu: 	stage 2 translation
[    3.984925] arm-smmu 12000000.iommu: 	nested translation
[    3.990374] arm-smmu 12000000.iommu: 	stream matching with 128 register groups
[    3.997780] arm-smmu 12000000.iommu: 	128 context banks (0 stage-2 only)
[    4.006936] arm-smmu 12000000.iommu: 	Supported page sizes: 0x00001000
[    4.013636] arm-smmu 12000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    4.020322] arm-smmu 12000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
[    4.027875] arm-smmu 10000000.iommu: probing hardware configuration...
[    4.034569] arm-smmu 10000000.iommu: SMMUv2 with:
[    4.039390] arm-smmu 10000000.iommu: 	stage 1 translation
[    4.044929] arm-smmu 10000000.iommu: 	stage 2 translation
[    4.050468] arm-smmu 10000000.iommu: 	nested translation
[    4.055916] arm-smmu 10000000.iommu: 	stream matching with 128 register groups
[    4.063323] arm-smmu 10000000.iommu: 	128 context banks (0 stage-2 only)
[    4.072468] arm-smmu 10000000.iommu: 	Supported page sizes: 0x00001000
[    4.079165] arm-smmu 10000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    4.085860] arm-smmu 10000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
[    4.093041] arm-smmu 8000000.iommu: probing hardware configuration...
[    4.099653] arm-smmu 8000000.iommu: SMMUv2 with:
[    4.104384] arm-smmu 8000000.iommu: 	stage 1 translation
[    4.109834] arm-smmu 8000000.iommu: 	stage 2 translation
[    4.115290] arm-smmu 8000000.iommu: 	nested translation
[    4.120651] arm-smmu 8000000.iommu: 	stream matching with 128 register groups
[    4.127974] arm-smmu 8000000.iommu: 	128 context banks (0 stage-2 only)
[    4.130194] arm-smmu 8000000.iommu: 	Supported page sizes: 0x00001000
[    4.141370] arm-smmu 8000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    4.147968] arm-smmu 8000000.iommu: 	Stage-2: 48-bit IPA -> 48-bit PA
[    4.155276] arm-smmu-suspend 12000000.smmu_suspend: arm_smmu_suspend probe successful
[    4.165134] tegra_profiler: version: 1.151, samples/io: 51/30
[    4.171128] tegra_profiler: auth: init
[    4.175289] nvsciipc: loaded module
[    4.180657] tun: Universal TUN/TAP device driver, 1.6
[    4.186384] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    4.193796] hns3: Copyright (c) 2017 Huawei Corporation.
[    4.199265] e1000e: Intel(R) PRO/1000 Network Driver
[    4.204361] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.210451] igb: Intel(R) Gigabit Ethernet Network Driver
[    4.215992] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.221892] PPP generic driver version 2.4.2
[    4.226324] PPP BSD Compression module registered
[    4.231148] PPP Deflate Compression module registered
[    4.236336] PPP MPPE Compression module registered
[    4.241277] usbcore: registered new interface driver r8152
[    4.246914] usbcore: registered new interface driver asix
[    4.252458] usbcore: registered new interface driver ax88179_178a
[    4.258731] usbcore: registered new interface driver cdc_ether
[    4.264726] usbcore: registered new interface driver net1080
[    4.270543] usbcore: registered new interface driver cdc_subset
[    4.276624] usbcore: registered new interface driver zaurus
[    4.282363] usbcore: registered new interface driver cdc_ncm
[    4.288178] usbcore: registered new interface driver aqc111
[    4.294032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.300383] ohci-pci: OHCI PCI platform driver
[    4.304953] ohci-platform: OHCI generic platform driver
[    4.310678] tegra-xusb 3610000.xhci: Adding to iommu group 0
[    4.317031] usbcore: registered new interface driver uas
[    4.322513] usbcore: registered new interface driver usb-storage
[    4.328848] tegra-xudc 3550000.xudc: Adding to iommu group 1
[    4.334944] mousedev: PS/2 mouse device common for all mice
[    4.340690] usbcore: registered new interface driver xpad
[    4.348124] tegra_rtc c2a0000.rtc: registered as rtc1
[    4.353591] tegra_rtc c2a0000.rtc: setting system clock to 1970-01-01T00:00:26 UTC (26)
[    4.361828] tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
[    4.368239] i2c /dev entries driver
[    4.371958] tegra-i2c 3160000.i2c: Adding to iommu group 2
[    4.377748] tegra-i2c c240000.i2c: Adding to iommu group 2
[    4.383458] tegra-i2c 3180000.i2c: Adding to iommu group 2
[    4.389145] tegra-i2c 3190000.i2c: Adding to iommu group 2
[    4.394831] tegra-i2c 31b0000.i2c: Adding to iommu group 2
[    4.400512] tegra-i2c 31c0000.i2c: Adding to iommu group 2
[    4.406190] tegra-i2c c250000.i2c: Adding to iommu group 2
[    4.411870] tegra-i2c 31e0000.i2c: Adding to iommu group 2
[    4.421421] device-mapper: uevent: version 1.0.3
[    4.426270] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    4.436016] sdhci: Secure Digital Host Controller Interface driver
[    4.442364] sdhci: Copyright(c) Pierre Ossman
[    4.446830] Synopsys Designware Multimedia Card Interface Driver
[    4.453081] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.459452] sdhci-tegra 3400000.sdhci: Adding to iommu group 3
[    4.459698] SMCCC: SOC_ID: ID = jep106:036b:0023 Revision = 0x00000401
[    4.472855] tegra-bpmp bpmp: firmware: f0fadc45ec6216cb5b0b-1377b684fe5
[    4.481506] nvvrs_pseq 4-003c: NVVRS Vendor ID: 0x9 
[    4.486927] nvvrs_pseq 4-003c: NVVRS Model Rev: 0x82
[    4.495646] nvvrs-pseq-rtc nvvrs-pseq-rtc: registered as rtc0
[    4.501571] nvvrs_pseq 4-003c: NVVRS PSEQ probe successful
[    5.574341] hid: raw HID events driver (C) Jiri Kosina
[    5.580225] usbcore: registered new interface driver usbhid
[    5.585958] usbhid: USB HID core driver
[    5.590426] tegra-dce d800000.dce: Adding to iommu group 4
[    5.597475] dce: dce_ipc_channel_init:319  Invalid Channel State [0x0] for ch_type [2]
[    5.606432] tegra234-aon c000000.aon: Adding to iommu group 5
[    5.612832] dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x5]
[    5.621962] dce: dce_admin_send_cmd_ver:424  version : [0x2] err : [0x0]
[    5.626821]  c000000.aon:hsp: probed
[    5.629006] dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x1]
[    5.641474] tegra234-aon c000000.aon: init done
[    5.641842] tegra23x-psc e860000.psc: Adding to iommu group 6
[    5.646168] dce: dce_admin_setup_clients_ipc:553  Channel Reset Complete for Type [1] ...
[    5.652393] tegra23x-psc e860000.psc: ext_cfg base:(____ptrval____)
[    5.660451] dce: dce_admin_setup_clients_ipc:529  Get queue info failed for [2]
[    5.660583] dce: dce_mailbox_set_full_interrupt:165  Intr bit set multiple times for MB : [0x2]
[    5.666889] tegra23x-psc e860000.psc: init done
[    5.667101] tegra186-cam-rtcpu bc00000.rtcpu: Adding to iommu group 7
[    5.674426] dce: dce_admin_setup_clients_ipc:553  Channel Reset Complete for Type [3] ...
[    5.684053] tegra186-cam-rtcpu bc00000.rtcpu: Trace buffer configured at IOVA=0xbff00000
[    5.688249] dce: dce_start_boot_flow:173  DCE_BOOT_DONE
[    5.718605] tegra-ivc-bus bc00000.rtcpu:ivc-bus: region 0: iova=0xbfec0000-0xbfee01ff size=131584
[    5.727788] tegra-ivc-bus bc00000.rtcpu:ivc-bus:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
[    5.739236] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@1: dbg: ver=0 grp=1 RX[1x448]=0x1900-0x1b40 TX[1x448]=0x1b40-0x1d80
[    5.750693] tegra-ivc-bus bc00000.rtcpu:ivc-bus:dbg@2: dbg: ver=0 grp=1 RX[1x8192]=0x1d80-0x3e00 TX[1x8192]=0x3e00-0x5e80
[    5.762417] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccontrol@3: ivccontrol: ver=0 grp=1 RX[64x320]=0x5e80-0xaf00 TX[64x320]=0xaf00-0xff80
[    5.774974] tegra-ivc-bus bc00000.rtcpu:ivc-bus:ivccapture@4: ivccapture: ver=0 grp=1 RX[512x64]=0xff80-0x18000 TX[512x64]=0x18000-0x20080
[    5.787789] tegra-ivc-bus bc00000.rtcpu:ivc-bus:diag@5: diag: ver=0 grp=1 RX[1x64]=0x20080-0x20140 TX[1x64]=0x20140-0x20200
[    5.799881] tegra186-cam-rtcpu bc00000.rtcpu: using cam RTCPU IRQ (113)
[    5.806690] tegra186-cam-rtcpu bc00000.rtcpu: tegra_camrtc_mon_create is successful
[    5.815320] tegra186-cam-rtcpu bc00000.rtcpu: firmware version cpu=rce cmd=6 sha1=97e50cbff52bc4b542b2989187109c001c01cf77
[    5.828815] t19x_cache tegra-cache: probed
[    5.833251] scf-pmu-drv scf-pmu: Registered T23x SCF Uncore PMU
[    5.844498] optee: probing for conduit method.
[    5.849095] optee: revision 3.19 (3f29c61f)
[    5.849899] optee: dynamic shared memory is enabled
[    5.859322] optee: initialized driver
[    5.874352] nvpmodel: initialized successfully
[    5.879030] tegra_hv: get_hvd: not initialized yet
[    5.883968] user_ivc_mempool: hypervisor not present
[    5.889897] usbcore: registered new interface driver snd-usb-audio
[    5.897080] u32 classifier
[    5.899865]     input device check on
[    5.903627]     Actions configured
[    5.907282] Initializing XFRM netlink socket
[    5.912084] NET: Registered protocol family 10
[    5.918114] Segment Routing with IPv6
[    5.921921] NET: Registered protocol family 17
[    5.926513] NET: Registered protocol family 15
[    5.931136] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    5.945201] Bluetooth: RFCOMM socket layer initialized
[    5.950514] Bluetooth: RFCOMM ver 1.11
[    5.954371] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.960452] Bluetooth: HIDP socket layer initialized
[    5.966039] 9pnet: Installing 9P2000 support
[    5.970491] Key type dns_resolver registered
[    5.975621] registered taskstats version 1
[    5.979838] Loading compiled-in X.509 certificates
[    5.994621] Loaded X.509 cert 'Build time autogenerated kernel key: e63fb224cdc2a940ac382bb67b420fcb52cc4aee'
[    6.005238] tegra194-pcie 14100000.pcie: Adding to iommu group 8
[    6.018160] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
[    6.025418] tegra194-pcie 14160000.pcie: Adding to iommu group 9
[    6.037792] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
[    6.044678] tegra194-pcie 141e0000.pcie: Adding to iommu group 10
[    6.056792] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator
[    6.063606] tegra194-pcie 140a0000.pcie: Adding to iommu group 11
[    6.075760] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator
[    6.082766] tegra194-pcie 140a0000.pcie: Failed to get slot regulators: -517
[    6.109129] tegra-soc-hwpm f100000.tegra_soc_hwpm: Adding to iommu group 12
[    6.119753] host1x 13e40000.host1x: Adding to iommu group 13
[    6.150161] host1x 13e40000.host1x: initialized
[    6.155223] iommu_context_dev 13e40000.host1x:niso0_ctx0: Adding to iommu group 14
[    6.163250] iommu_context_dev 13e40000.host1x:niso0_ctx0: initialized (streamid=53, iommu=smmu.0x0000000012000000)
[    6.175536] iommu_context_dev 13e40000.host1x:niso0_ctx1: Adding to iommu group 15
[    6.183521] iommu_context_dev 13e40000.host1x:niso0_ctx1: initialized (streamid=54, iommu=smmu.0x0000000012000000)
[    6.195812] iommu_context_dev 13e40000.host1x:niso0_ctx2: Adding to iommu group 16
[    6.203782] iommu_context_dev 13e40000.host1x:niso0_ctx2: initialized (streamid=55, iommu=smmu.0x0000000012000000)
[    6.216080] iommu_context_dev 13e40000.host1x:niso0_ctx3: Adding to iommu group 17
[    6.224038] iommu_context_dev 13e40000.host1x:niso0_ctx3: initialized (streamid=56, iommu=smmu.0x0000000012000000)
[    6.236329] iommu_context_dev 13e40000.host1x:niso0_ctx4: Adding to iommu group 18
[    6.244328] iommu_context_dev 13e40000.host1x:niso0_ctx4: initialized (streamid=57, iommu=smmu.0x0000000012000000)
[    6.256628] iommu_context_dev 13e40000.host1x:niso0_ctx5: Adding to iommu group 19
[    6.264596] iommu_context_dev 13e40000.host1x:niso0_ctx5: initialized (streamid=58, iommu=smmu.0x0000000012000000)
[    6.276880] iommu_context_dev 13e40000.host1x:niso0_ctx6: Adding to iommu group 20
[    6.284856] iommu_context_dev 13e40000.host1x:niso0_ctx6: initialized (streamid=59, iommu=smmu.0x0000000012000000)
[    6.297164] iommu_context_dev 13e40000.host1x:niso0_ctx7: Adding to iommu group 21
[    6.305130] iommu_context_dev 13e40000.host1x:niso0_ctx7: initialized (streamid=60, iommu=smmu.0x0000000012000000)
[    6.317436] iommu_context_dev 13e40000.host1x:niso1_ctx0: Adding to iommu group 22
[    6.325406] iommu_context_dev 13e40000.host1x:niso1_ctx0: initialized (streamid=53, iommu=smmu.0x0000000008000000)
[    6.337709] iommu_context_dev 13e40000.host1x:niso1_ctx1: Adding to iommu group 23
[    6.345677] iommu_context_dev 13e40000.host1x:niso1_ctx1: initialized (streamid=54, iommu=smmu.0x0000000008000000)
[    6.357955] iommu_context_dev 13e40000.host1x:niso1_ctx2: Adding to iommu group 24
[    6.365966] iommu_context_dev 13e40000.host1x:niso1_ctx2: initialized (streamid=55, iommu=smmu.0x0000000008000000)
[    6.378257] iommu_context_dev 13e40000.host1x:niso1_ctx3: Adding to iommu group 25
[    6.386245] iommu_context_dev 13e40000.host1x:niso1_ctx3: initialized (streamid=56, iommu=smmu.0x0000000008000000)
[    6.398565] iommu_context_dev 13e40000.host1x:niso1_ctx4: Adding to iommu group 26
[    6.406524] iommu_context_dev 13e40000.host1x:niso1_ctx4: initialized (streamid=57, iommu=smmu.0x0000000008000000)
[    6.418836] iommu_context_dev 13e40000.host1x:niso1_ctx5: Adding to iommu group 27
[    6.426799] iommu_context_dev 13e40000.host1x:niso1_ctx5: initialized (streamid=58, iommu=smmu.0x0000000008000000)
[    6.439123] iommu_context_dev 13e40000.host1x:niso1_ctx6: Adding to iommu group 28
[    6.447100] iommu_context_dev 13e40000.host1x:niso1_ctx6: initialized (streamid=59, iommu=smmu.0x0000000008000000)
[    6.459415] iommu_context_dev 13e40000.host1x:niso1_ctx7: Adding to iommu group 29
[    6.467374] iommu_context_dev 13e40000.host1x:niso1_ctx7: initialized (streamid=60, iommu=smmu.0x0000000008000000)
[    6.479706] falcon 15340000.vic: Adding to iommu group 30
[    6.490121] falcon 15340000.vic: initialized
[    6.494850] falcon 15380000.nvjpg: Adding to iommu group 31
[    6.503633] falcon 15380000.nvjpg: initialized
[    6.508338] falcon 15540000.nvjpg1: Adding to iommu group 32
[    6.517567] falcon 15540000.nvjpg1: initialized
[    6.522384] falcon 15a50000.ofa: Adding to iommu group 33
[    6.530944] falcon 15a50000.ofa: initialized
[    6.535501] nvdec 15480000.nvdec: Adding to iommu group 34
[    6.546741] nvdec 15480000.nvdec: initialized
[    6.551382] tsec 15500000.tsec: Adding to iommu group 35
[    6.561652] tsec 15500000.tsec: initialized
[    6.569266] gic 2a41000.agic-controller: GIC IRQ controller registered
[    6.586719] tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
[    6.602678] gpio-397 (camera-control-output-low): hogged as output/low
[    6.609437] gpio-486 (camera-control-output-low): hogged as output/low
[    6.617265] gpiochip0: registered GPIOs 348 to 511 on tegra234-gpio
[    6.624658] gpiochip1: registered GPIOs 316 to 347 on tegra234-gpio-aon
[    6.631663] tegra-pwm 3280000.pwm: PWM clk can sleep in ops
[    6.638167] tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
[    6.644689] tegra-pwm 32c0000.pwm: PWM clk can sleep in ops
[    6.653034] tegra194-isp5 14800000.isp: Adding to iommu group 36
[    6.661559] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: context isolation disabled due to no IOMMU
[    6.671173] t194-nvcsi 13e40000.host1x:nvcsi@15a00000: initialized
[    6.677628] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound
[    6.686852] tegra-camrtc-capture-vi tegra-capture-vi: subdev 13e40000.host1x:nvcsi@15a00000- bound
[    6.696224] tegra194-vi5 13e40000.host1x:vi0@15c00000: Adding to iommu group 37
[    6.704327] tegra194-vi5 13e40000.host1x:vi1@14c00000: Adding to iommu group 38
[    6.712290] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: context isolation disabled due to no IOMMU
[    6.722252] scare-pigeon 13e40000.host1x:vi0-thi@15f00000: initialized
[    6.729066] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: context isolation disabled due to no IOMMU
[    6.739056] scare-pigeon 13e40000.host1x:vi1-thi@14f00000: initialized
[    6.745876] scare-pigeon 13e40000.host1x:isp-thi@14b00000: context isolation disabled due to no IOMMU
[    6.755867] scare-pigeon 13e40000.host1x:isp-thi@14b00000: initialized
[    6.762784] tegra-gpcdma 2600000.gpcdma: Adding to iommu group 2
[    6.769945] tegra-gpcdma 2600000.gpcdma: GPC DMA driver register 31 channels
[    6.777464] tegra-fuse-burn efuse-burn: shutdown limit check disabled
[    6.784101] tegra-fuse-burn efuse-burn: Fuse burn driver initialized
[    6.790824] serial-tegra 3100000.serial: Adding to iommu group 2
[    6.797391] 3100000.serial: ttyTHS0 at MMIO 0x3100000 (irq = 17, base_baud = 0) is a TEGRA_UART
[    6.807199] serial-tegra 3130000.serial: Adding to iommu group 2
[    6.813815] 3130000.serial: ttyTHS3 at MMIO 0x3130000 (irq = 63, base_baud = 0) is a TEGRA_UART
[    6.823520] serial-tegra 3140000.serial: Adding to iommu group 2
[    6.830054] 3140000.serial: ttyTHS4 at MMIO 0x3140000 (irq = 64, base_baud = 0) is a TEGRA_UART
[    6.856098] tegra-xusb 3610000.xhci: Firmware timestamp: 2021-12-01 05:27:10 UTC, Version: 80.03 release
[    6.865868] tegra-xusb 3610000.xhci: xHCI Host Controller
[    6.871473] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 1
[    6.880151] tegra-xusb 3610000.xhci: hcc params 0x0180ff05 hci version 0x120 quirks 0x0000000000050810
[    6.889760] tegra-xusb 3610000.xhci: irq 219, io mem 0x03610000
[    6.896212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    6.904715] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.912146] usb usb1: Product: xHCI Host Controller
[    6.917154] usb usb1: Manufacturer: Linux 5.10.104-tegra xhci-hcd
[    6.923418] usb usb1: SerialNumber: 3610000.xhci
[    6.928919] hub 1-0:1.0: USB hub found
[    6.932801] hub 1-0:1.0: 4 ports detected
[    6.937181] tegra-xusb 3610000.xhci: xHCI Host Controller
[    6.942754] tegra-xusb 3610000.xhci: new USB bus registered, assigned bus number 2
[    6.950550] tegra-xusb 3610000.xhci: Host supports USB 3.1 Enhanced SuperSpeed
[    6.958061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    6.966574] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.974001] usb usb2: Product: xHCI Host Controller
[    6.979008] usb usb2: Manufacturer: Linux 5.10.104-tegra xhci-hcd
[    6.985272] usb usb2: SerialNumber: 3610000.xhci
[    6.990609] hub 2-0:1.0: USB hub found
[    6.994483] hub 2-0:1.0: 4 ports detected
[    7.019097] i2c i2c-2: Added multiplexed i2c bus 9
[    7.024363] i2c i2c-2: Added multiplexed i2c bus 10
[    7.029391] i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter
[    7.036352] tegra23x-oc-event soctherm-oc-event: Finished tegra23x overcurrent event probing
[    7.057268] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1531000 KHz, changing to: 1510400 KHz
[    7.071426] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 1533000 KHz, changing to: 1510400 KHz
[    7.083337] tegra194-cpufreq e000000.ccplex: probed with ICC
[    7.090972] tegra194-pcie 14100000.pcie: Using GICv2m MSI allocator
[    7.092079] sdhci-tegra 3400000.sdhci: Got CD GPIO
[    7.098837] tegra194-pcie 14100000.pcie: host bridge /pcie@14100000 ranges:
[    7.109548] tegra194-pcie 14100000.pcie:       IO 0x0030100000..0x00301fffff -> 0x0030100000
[    7.111856] irq: IRQ283: trimming hierarchy from :interrupt-controller@f400000-1
[    7.118233] tegra194-pcie 14100000.pcie:      MEM 0x20a8000000..0x20afffffff -> 0x0040000000
[    7.118238] tegra194-pcie 14100000.pcie:      MEM 0x2080000000..0x20a7ffffff -> 0x2080000000
[    7.125923] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 283
[    7.206083] usb 1-2: new high-speed USB device number 2 using tegra-xusb
[    7.242281] tegra194-pcie 14100000.pcie: Link up
[    7.250677] tegra194-pcie 14100000.pcie: PCI host bridge to bus 0001:00
[    7.257482] pci_bus 0001:00: root bus resource [bus 00-ff]
[    7.263119] pci_bus 0001:00: root bus resource [io  0x0000-0xfffff] (bus address [0x30100000-0x301fffff])
[    7.272951] pci_bus 0001:00: root bus resource [mem 0x20a8000000-0x20afffffff] (bus address [0x40000000-0x47ffffff])
[    7.283777] pci_bus 0001:00: root bus resource [mem 0x2080000000-0x20a7ffffff pref]
[    7.291710] pci 0001:00:00.0: [10de:229e] type 01 class 0x060400
[    7.298057] pci 0001:00:00.0: PME# supported from D0 D3hot
[    7.309555] pci 0001:01:00.0: [10ec:c822] type 00 class 0x028000
[    7.315891] pci 0001:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    7.321823] pci 0001:01:00.0: reg 0x18: [mem 0x20a8000000-0x20a800ffff 64bit]
[    7.330296] pci 0001:01:00.0: supports D1 D2
[    7.334697] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    7.346983] pci 0001:00:00.0: BAR 14: assigned [mem 0x20a8000000-0x20a80fffff]
[    7.354410] pci 0001:00:00.0: BAR 13: assigned [io  0x1000-0x1fff]
[    7.360765] pci 0001:01:00.0: BAR 2: assigned [mem 0x20a8000000-0x20a800ffff 64bit]
[    7.368737] pci 0001:01:00.0: BAR 0: assigned [io  0x1000-0x10ff]
[    7.375045] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    7.380417] pci 0001:00:00.0:   bridge window [io  0x1000-0x1fff]
[    7.385728] usb 1-2: New USB device found, idVendor=0bda, idProduct=5489, bcdDevice= 1.40
[    7.386682] pci 0001:00:00.0:   bridge window [mem 0x20a8000000-0x20a80fffff]
[    7.386699] pci 0001:00:00.0: Max Payload Size set to  128/ 256 (was  256), Max Read Rq  512
[    7.395117] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.402531] pci 0001:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  512
[    7.411160] usb 1-2: Product: 4-Port USB 2.0 Hub
[    7.418874] pcieport 0001:00:00.0: Adding to iommu group 8
[    7.427200] usb 1-2: Manufacturer: Generic
[    7.430202] hub 1-2:1.0: USB hub found
[    7.432262] pcieport 0001:00:00.0: PME: Signaling with IRQ 55
[    7.439014] hub 1-2:1.0: 4 ports detected
[    7.442470] pcieport 0001:00:00.0: AER: enabled with IRQ 55
[    7.462630] tegra194-pcie 14160000.pcie: Using GICv2m MSI allocator
[    7.470358] tegra194-pcie 14160000.pcie: host bridge /pcie@14160000 ranges:
[    7.477537] tegra194-pcie 14160000.pcie:       IO 0x0036100000..0x00361fffff -> 0x0036100000
[    7.486220] tegra194-pcie 14160000.pcie:      MEM 0x2428000000..0x242fffffff -> 0x0040000000
[    7.494899] tegra194-pcie 14160000.pcie:      MEM 0x2140000000..0x2427ffffff -> 0x2140000000
[    7.502863] usb 2-1: new SuperSpeedPlus Gen 2 USB device number 2 using tegra-xusb
[    7.549206] usb 2-1: New USB device found, idVendor=0bda, idProduct=0489, bcdDevice= 1.40
[    7.557620] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.564961] usb 2-1: Product: 4-Port USB 3.0 Hub
[    7.569699] usb 2-1: Manufacturer: Generic
[    7.584702] hub 2-1:1.0: USB hub found
[    7.590752] hub 2-1:1.0: 4 ports detected
[    7.618085] tegra194-pcie 14160000.pcie: Link up
[    7.633695] tegra194-pcie 14160000.pcie: PCI host bridge to bus 0004:00
[    7.640511] pci_bus 0004:00: root bus resource [bus 00-ff]
[    7.646151] pci_bus 0004:00: root bus resource [io  0x100000-0x1fffff] (bus address [0x36100000-0x361fffff])
[    7.656248] pci_bus 0004:00: root bus resource [mem 0x2428000000-0x242fffffff] (bus address [0x40000000-0x47ffffff])
[    7.666237] usb 1-3: new full-speed USB device number 3 using tegra-xusb
[    7.667071] pci_bus 0004:00: root bus resource [mem 0x2140000000-0x2427ffffff pref]
[    7.681861] pci 0004:00:00.0: [10de:229c] type 01 class 0x060400
[    7.688178] pci 0004:00:00.0: PME# supported from D0 D3hot
[    7.698784] pci 0004:01:00.0: [c0a9:540a] type 00 class 0x010802
[    7.705143] pci 0004:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    7.718431] pci 0004:00:00.0: BAR 14: assigned [mem 0x2428000000-0x24280fffff]
[    7.725865] pci 0004:01:00.0: BAR 0: assigned [mem 0x2428000000-0x2428003fff 64bit]
[    7.733827] pci 0004:00:00.0: PCI bridge to [bus 01-ff]
[    7.739195] pci 0004:00:00.0:   bridge window [mem 0x2428000000-0x24280fffff]
[    7.746552] pci 0004:00:00.0: Max Payload Size set to  256/ 256 (was  256), Max Read Rq  512
[    7.755284] pci 0004:01:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    7.764219] pcieport 0004:00:00.0: Adding to iommu group 9
[    7.770098] pcieport 0004:00:00.0: PME: Signaling with IRQ 57
[    7.776513] pcieport 0004:00:00.0: AER: enabled with IRQ 57
[    7.782588] nvme 0004:01:00.0: Adding to iommu group 9
[    7.788341] nvme nvme0: pci function 0004:01:00.0
[    7.793389] nvme 0004:01:00.0: enabling device (0000 -> 0002)
[    7.793970] tegra194-pcie 141e0000.pcie: Using GICv2m MSI allocator
[    7.804941] nvme nvme0: missing or invalid SUBNQN field.
[    7.806757] tegra194-pcie 141e0000.pcie: host bridge /pcie@141e0000 ranges:
[    7.818357] tegra194-pcie 141e0000.pcie:       IO 0x003e100000..0x003e1fffff -> 0x003e100000
[    7.819169] nvme nvme0: allocated 32 MiB host memory buffer.
[    7.826428] usb 1-3: New USB device found, idVendor=13d3, idProduct=3549, bcdDevice= 0.00
[    7.826431] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.826432] usb 1-3: Product: Bluetooth Radio
[    7.826434] usb 1-3: Manufacturer: Realtek
[    7.826435] usb 1-3: SerialNumber: 00e04c000001
[    7.827042] tegra194-pcie 141e0000.pcie:      MEM 0x3228000000..0x322fffffff -> 0x0040000000
[    7.858312] nvme nvme0: 6/0/0 default/read/poll queues
[    7.861912] tegra194-pcie 141e0000.pcie:      MEM 0x2e40000000..0x3227ffffff -> 0x2e40000000
[    7.873663]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14
[    8.970417] tegra194-pcie 141e0000.pcie: Phy link never came up
[    8.976600] tegra194-pcie 141e0000.pcie: PCI host bridge to bus 0007:00
[    8.983400] pci_bus 0007:00: root bus resource [bus 00-ff]
[    8.989034] pci_bus 0007:00: root bus resource [io  0x200000-0x2fffff] (bus address [0x3e100000-0x3e1fffff])
[    8.999144] pci_bus 0007:00: root bus resource [mem 0x3228000000-0x322fffffff] (bus address [0x40000000-0x47ffffff])
[    9.009963] pci_bus 0007:00: root bus resource [mem 0x2e40000000-0x3227ffffff pref]
[    9.017884] pci 0007:00:00.0: [10de:229a] type 01 class 0x060400
[    9.024195] pci 0007:00:00.0: PME# supported from D0 D3hot
[    9.039351] pci 0007:00:00.0: PCI bridge to [bus 01-ff]
[    9.044738] pci 0007:00:00.0: Max Payload Size set to  256/ 256 (was  256), Max Read Rq  512
[    9.053726] pcieport 0007:00:00.0: Adding to iommu group 10
[    9.059720] pcieport 0007:00:00.0: PME: Signaling with IRQ 59
[    9.066169] pcieport 0007:00:00.0: AER: enabled with IRQ 59
[    9.072137] pci_bus 0007:01: busn_res: [bus 01-ff] is released
[    9.078239] pci 0007:00:00.0: Removing from iommu group 10
[    9.083879] pci_bus 0007:00: busn_res: [bus 00-ff] is released
[    9.091513] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator
[    9.098050] tegra194-pcie 140a0000.pcie: Failed to get slot regulators: -517
[    9.098335] vdd-3v3-sd: supplied by vdd-3v3
[    9.104640] tegra194-isp5 14800000.isp: initialized
[    9.112292] tegra194-vi5 13e40000.host1x:vi0@15c00000: initialized
[    9.118756] (NULL device *): fops function table already registered
[    9.126750] tegra194-vi5 13e40000.host1x:vi1@14c00000: initialized
[    9.133920] sdhci-tegra 3400000.sdhci: Got CD GPIO
[    9.133924] tegra194-pcie 140a0000.pcie: Using GICv2m MSI allocator
[    9.145677] irq: IRQ291: trimming hierarchy from :interrupt-controller@f400000-1
[    9.154115] sdhci-tegra 3400000.sdhci: wakeup init done, cdirq 283
[    9.259067] tegra194-pcie 140a0000.pcie: host bridge /pcie@140a0000 ranges:
[    9.266243] tegra194-pcie 140a0000.pcie:       IO 0x002a100000..0x002a1fffff -> 0x002a100000
[    9.274928] tegra194-pcie 140a0000.pcie:      MEM 0x3528000000..0x352fffffff -> 0x0040000000
[    9.283607] tegra194-pcie 140a0000.pcie:      MEM 0x3240000000..0x3527ffffff -> 0x3240000000
[    9.398248] tegra194-pcie 140a0000.pcie: Link up
[    9.406014] tegra194-pcie 140a0000.pcie: PCI host bridge to bus 0008:00
[    9.412831] pci_bus 0008:00: root bus resource [bus 00-ff]
[    9.418467] pci_bus 0008:00: root bus resource [io  0x300000-0x3fffff] (bus address [0x2a100000-0x2a1fffff])
[    9.428578] pci_bus 0008:00: root bus resource [mem 0x3528000000-0x352fffffff] (bus address [0x40000000-0x47ffffff])
[    9.439401] pci_bus 0008:00: root bus resource [mem 0x3240000000-0x3527ffffff pref]
[    9.447327] pci 0008:00:00.0: [10de:229c] type 01 class 0x060400
[    9.453640] pci 0008:00:00.0: PME# supported from D0 D3hot
[    9.464313] pci 0008:01:00.0: [10ec:8168] type 00 class 0x020000
[    9.470628] pci 0008:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    9.476546] pci 0008:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
[    9.483642] pci 0008:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[    9.491664] pci 0008:01:00.0: supports D1 D2
[    9.496059] pci 0008:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    9.508056] pci 0008:00:00.0: BAR 14: assigned [mem 0x3528000000-0x35280fffff]
[    9.515482] pci 0008:00:00.0: BAR 13: assigned [io  0x300000-0x300fff]
[    9.522186] pci 0008:01:00.0: BAR 4: assigned [mem 0x3528000000-0x3528003fff 64bit]
[    9.530156] pci 0008:01:00.0: BAR 2: assigned [mem 0x3528004000-0x3528004fff 64bit]
[    9.538126] pci 0008:01:00.0: BAR 0: assigned [io  0x300000-0x3000ff]
[    9.544759] pci 0008:00:00.0: PCI bridge to [bus 01-ff]
[    9.550126] pci 0008:00:00.0:   bridge window [io  0x300000-0x300fff]
[    9.556757] pci 0008:00:00.0:   bridge window [mem 0x3528000000-0x35280fffff]
[    9.564111] pci 0008:00:00.0: Max Payload Size set to  128/ 256 (was  256), Max Read Rq  512
[    9.572855] pci 0008:01:00.0: Max Payload Size set to  128/ 128 (was  128), Max Read Rq  512
[    9.581806] pcieport 0008:00:00.0: Adding to iommu group 11
[    9.587793] pcieport 0008:00:00.0: PME: Signaling with IRQ 61
[    9.593963] pcieport 0008:00:00.0: AER: enabled with IRQ 61
[    9.601105] irq: IRQ293: trimming hierarchy from :pmc@c360000
[    9.607089] irq: IRQ294: trimming hierarchy from :interrupt-controller@f400000-1
[    9.614804] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    9.622237] tegra-se-nvhost 15810000.se: Adding to iommu group 39
[    9.628853] tegra-se-nvhost 15810000.se: initialized
[    9.635415] tegra-se-nvhost 15810000.se: tegra_se_probe: complete
[    9.641840] tegra-se-nvhost 15820000.se: Adding to iommu group 40
[    9.648412] tegra-se-nvhost 15820000.se: initialized
[    9.656746] tegra-se-nvhost 15820000.se: tegra_se_probe: complete
[    9.663169] tegra-se-nvhost 15840000.se: Adding to iommu group 41
[    9.669782] tegra-se-nvhost 15840000.se: initialized
[    9.680219] tegra-se-nvhost 15840000.se: tegra_se_probe: complete
[    9.687247] tegra_actmon d230000.actmon: in actmon_register()...
[    9.693597] tegra_actmon d230000.actmon: bwmgr_disable = 1
[    9.699817] tegra_actmon d230000.actmon: initialization Completed for the device mc_all
[    9.708239] hvc_sysfs: hypervisor is not present
[    9.753276] ALSA device list:
[    9.756333]   No soundcards found.
[    9.760762] Freeing unused kernel memory: 3968K
[    9.766112] Run /init as init process
[    9.769878]   with arguments:
[    9.769880]     /init
[    9.769881]     nv-auto-config
[    9.769882]   with environment:
[    9.769883]     HOME=/
[    9.769884]     TERM=linux
[    9.769885]     mminit_loglevel=4
[    9.786016] Root device found: PARTUUID=df5b9347-ea46-4dfd-a8b6-d5d743021bcb
[   10.080418] EXT4-fs (nvme0n1p1): 3 orphan inodes deleted
[   10.085903] EXT4-fs (nvme0n1p1): recovery complete
[   10.098815] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
[   10.110660] Rootfs mounted over PARTUUID=df5b9347-ea46-4dfd-a8b6-d5d743021bcb
[   10.127387] Switching from initrd to actual rootfs
[   10.182003] systemd[1]: System time before build time, advancing clock.
[   10.219687] mmc1: SDHCI controller on 3400000.sdhci [3400000.sdhci] using ADMA 64-bit
[   10.245734] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   10.269496] systemd[1]: Detected architecture arm64.
[   10.310366] systemd[1]: Set hostname to <ubuntu>.
[   10.462476] random: systemd: uninitialized urandom read (16 bytes read)
[   10.469399] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[   10.482371] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[   10.492382] systemd[1]: Created slice system-modprobe.slice.
[   10.514124] random: systemd: uninitialized urandom read (16 bytes read)
[   10.521425] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   10.542117] random: systemd: uninitialized urandom read (16 bytes read)
[   10.549378] systemd[1]: Created slice User and Session Slice.
[   10.574203] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.598419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.622187] systemd[1]: Reached target User and Group Name Lookups.
[   10.642127] systemd[1]: Reached target Slices.
[   10.658114] systemd[1]: Reached target Mounting snaps.
[   10.678110] systemd[1]: Reached target Mounted snaps.
[   10.698112] systemd[1]: Reached target Swap.
[   10.714422] systemd[1]: Listening on RPCbind Server Activation Socket.
[   10.734255] systemd[1]: Listening on Syslog Socket.
[   10.754255] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.778180] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.802377] systemd[1]: Listening on Journal Audit Socket.
[   10.822226] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.846258] systemd[1]: Listening on Journal Socket.
[   10.866266] systemd[1]: Listening on udev Control Socket.
[   10.886199] systemd[1]: Listening on udev Kernel Socket.
[   10.907662] systemd[1]: Mounting Huge Pages File System...
[   10.927513] systemd[1]: Mounting POSIX Message Queue File System...
[   10.947346] systemd[1]: Mounting RPC Pipe File System...
[   10.967433] systemd[1]: Mounting Kernel Debug File System...
[   10.987529] systemd[1]: Mounting Kernel Trace File System...
[   11.007869] systemd[1]: Starting Journal Service...
[   11.027895] systemd[1]: Starting Set the console keyboard layout...
[   11.051837] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   11.079506] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[   11.102149] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[   11.111983] systemd[1]: Starting Load Kernel Module efi_pstore...
[   11.131446] systemd[1]: Starting Load Kernel Module pstore_blk...
[   11.151341] systemd[1]: Starting Load Kernel Module pstore_zone...
[   11.171302] systemd[1]: Starting Load Kernel Module ramoops...
[   11.191531] systemd[1]: Starting NVIDIA specific first-boot udev script...
[   11.200099] random: crng init done
[   11.206514] random: 7 urandom warning(s) missed due to ratelimiting
[   11.223523] systemd[1]: Started Nameserver information manager.
[   11.242349] systemd[1]: Reached target Network (Pre).
[   11.262623] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   11.271988] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   11.283673] systemd[1]: Starting Load Kernel Modules...
[   11.298024] nvmap_heap_init: nvmap_heap_init: created heap block cache
[   11.305698] nvmap_page_pool_init: Total RAM pages: 1878202
[   11.311389] nvmap_page_pool_init: nvmap page pool size: 234775 pages (917 MB)
[   11.318989] nvmap_background_zero_thread: PP zeroing thread starting.
[   11.327891] systemd[1]: Starting Remount Root and Kernel File Systems...
[   11.338385] EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
[   11.360008] systemd[1]: Starting udev Coldplug all Devices...
[   11.363233] nvgpu: 17000000.ga10b          nvgpu_nvhost_syncpt_init:135  [INFO]  syncpt_unit_base 60000000 syncpt_unit_size 4000000 size 10000

[   11.396634] systemd[1]: Started Journal Service.
[   11.695149] systemd-journald[244]: Received client request to flush runtime journal.
[   12.282781] nvidia: loading out-of-tree module taints kernel.
[   12.336199] nv_platform 13800000.display: Adding to iommu group 42
[   12.339733] platform 13800000.display:nvdisplay-niso: Adding to iommu group 43
[   12.344687] NVRM: loading NVIDIA UNIX Open Kernel Module for aarch64  35.3.1  Release Build  (buildbrain@mobile-u64-6289-d7000)  Sun Mar 19 08:09:33 PDT 2023
[   12.376955] spi-tegra114 3210000.spi: Adding to iommu group 2
[   12.405367] spi-tegra114 3230000.spi: Adding to iommu group 2
[   12.407811] imx219 9-0010: tegracam sensor driver:imx219_v2.0.6
[   12.407827] tegra-hda 3510000.hda: Adding to iommu group 44
[   12.418488] imx219 9-0010: imx219_board_setup: error during i2c read probe (-121)
[   12.438059] imx219 9-0010: board setup failed
[   12.443748] imx219: probe of 9-0010 failed with error -121
[   12.454376] imx219 10-0010: tegracam sensor driver:imx219_v2.0.6
[   12.461096] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=3 as /devices/platform/3510000.hda/sound/card0/input1
[   12.461257] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=7 as /devices/platform/3510000.hda/sound/card0/input2
[   12.461398] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=8 as /devices/platform/3510000.hda/sound/card0/input3
[   12.461551] input: NVIDIA Jetson Orin NX HDA HDMI/DP,pcm=9 as /devices/platform/3510000.hda/sound/card0/input4
[   12.465068] imx219 10-0010: imx219_board_setup: error during i2c read probe (-121)
[   12.476398] rtl88x2ce 0001:01:00.0: Adding to iommu group 8
[   12.476793] rtl88x2ce 0001:01:00.0: enabling device (0000 -> 0003)
[   12.481911] r8169 0008:01:00.0: Adding to iommu group 11
[   12.487229] r8169 0008:01:00.0: enabling device (0000 -> 0003)
[   12.490979] imx219 10-0010: board setup failed
[   12.499124] imx219: probe of 10-0010 failed with error -121
[   12.514053] cpu-throttle-alert cooling device registered.
[   12.514394] nvadsp 2993000.adsp: Adding to iommu group 45
[   12.514425] gpu-throttle-alert cooling device registered.
[   12.514534] cv0-throttle-alert cooling device registered.
[   12.514551] nvadsp 2993000.adsp: in probe()...
[   12.515120] cv1-throttle-alert cooling device registered.
[   12.515213] cv2-throttle-alert cooling device registered.
[   12.515272] nvadsp 2993000.adsp: nvadsp_app_module_probe
[   12.515315] soc0-throttle-alert cooling device registered.
[   12.515463] soc1-throttle-alert cooling device registered.
[   12.515539] soc2-throttle-alert cooling device registered.
[   12.515678] hot-surface-alert cooling device registered.
[   12.517047] r8169 0008:01:00.0 eth0: RTL8168h/8111h, 48:b0:2d:e8:c6:69, XID 541, IRQ 296
[   12.517053] r8169 0008:01:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[   12.521320] irq: IRQ297: trimming hierarchy from :pmc@c360000
[   12.530694] fusb301 1-0025: device id: 0x12
[   12.531616] tegra-adma 2930000.adma: Tegra210 ADMA driver registered 16 channels
[   12.542633] tegra210-adsp aconnect@2a41000:adsp_audio: Adding to iommu group 45
[   12.542667] tegra210_adsp_audio_probe: platform probe started
[   12.543136] tegra210-adsp tegra210-adsp: Default param-type to BYTE for mp3-dec1
[   12.543474] tegra210-adsp tegra210-adsp: Default param-type to BYTE for spkprot
[   12.543804] tegra210-adsp tegra210-adsp: Default param-type to BYTE for src
[   12.544136] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aac-dec1
[   12.544458] tegra210-adsp tegra210-adsp: Default param-type to BYTE for aec
[   12.544781] tegra210-adsp tegra210-adsp: Default param-type to BYTE for wire
[   12.544784] tegra210-adsp tegra210-adsp: adma channel page address dt entry not found
[   12.544786] tegra210-adsp tegra210-adsp: using adma channel page 0
[   12.544853] nvadsp 2993000.adsp: ADSP OS firmware already loaded
[   12.553053] usbcore: registered new interface driver btusb
[   12.560917] rtk_btusb: Realtek Bluetooth USB driver ver 3.1
[   12.560923] rtk_btcoex: rtk_btcoex_init: version: 1.2
[   12.560924] rtk_btcoex: create workqueue
[   12.561060] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[   12.561120] rtk_btusb: btusb_probe intf->cur_altsetting->desc.bInterfaceNumber 0
[   12.561122] rtk_btusb: btusb_probe can_wakeup 1, may wakeup 0
[   12.561123] rtk_btusb: patch_add
[   12.561125] rtk_btusb: auto suspend is disabled
[   12.561127] rtk_btusb: pid = 0x3549
[   12.561129] rtk_btusb: patch_add: Reset gEVersion to 0xff
[   12.561137] rtk_btusb: set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
[   12.561430] rtk_btusb: btusb_probe: done
[   12.561678] usbcore: registered new interface driver rtk_btusb
[   12.562099] rtk_btusb: btusb_open start
[   12.562103] rtk_btusb: btusb_open hdev->promisc ==0
[   12.562105] rtk_btusb: download_patch start
[   12.562108] rtk_btusb: chip type value: 0x73
[   12.562111] rtk_btusb: HCI reset.
[   12.563696] fusb301 1-0025: toggle_time(0) is not updated
[   12.570217] fusb301 1-0025: fusb301_set_mode: mode (32)(32)
[   12.570550] fusb301 1-0025: fusb301_detach: type[0x00] chipstate[0x01]
[   12.570555] fusb301 1-0025: fusb_update_state: 1
[   12.571470] fusb301 1-0025: mode[0x20], host_cur[0x02], dttime[0x00]
[   12.573032] rtk_btusb: read_ver_rsp->lmp_subver = 0x8822
[   12.573035] rtk_btusb: read_ver_rsp->hci_rev = 0xc
[   12.573038] rtk_btusb: patch_entry->lmp_sub = 0x8822
[   12.573041] rtk_btusb: load_firmware start
[   12.573044] rtk_btusb: lmp_version = 0x8822
[   12.573046] rtk_btusb: config filename rtl8822cu_config
[   12.573327] rtk_btusb: no bdaddr file /opt/bdaddr
[   12.573332] rtk_btusb: 55 ab 23 87 00 00
[   12.573340] rtk_btusb: Config file length 6, new length 6
[   12.573342] rtk_btusb: fw name is  rtl8822cu_fw
[   12.573694] rtk_btusb: This is not 8723a, use new patch style!
[   12.573698] rtk_btusb: rtk_get_eversion: gEVersion 255
[   12.575032] rtk_btusb: eversion->status = 0x0, eversion->version = 0x3
[   12.575039] rtk_btusb: load_firmware: New gEVersion 3
[   12.575042] rtk_btusb: rtk_get_fw_project_id: opcode 0, len 1, data 13
[   12.575044] rtk_btusb: lmp_version is 8822, project_id is 8822, match!
[   12.575045] rtk_btusb: fw_version = 0x9a8cbc9
[   12.575046] rtk_btusb: number_of_total_patch = 3
[   12.575048] rtk_btusb: chipID 4
[   12.575049] rtk_btusb: patch_length 0x8590
[   12.575050] rtk_btusb: start_offset 0x00005d00
[   12.575052] rtk_btusb: Svn version: 1940234490
[   12.575053] rtk_btusb: Coexistence: BTCOEX_20210106-2020
[   12.575055] rtk_btusb: buf_len = 0x8596
[   12.575066] rtk_btusb: fw: exists, config file: exists
[   12.575067] rtk_btusb: load_firmware done
[   12.575082] rtk_btusb: download_data start
[   12.600822] tegra-asoc: sound: Adding to iommu group 45
[   12.706629] fusb301 1-0025: fusb301_work_handler: int_sts[0x05]
[   12.707189] fusb301 1-0025: sts[0x2b], type[0x08]
[   12.707194] fusb301 1-0025: fusb_update_state: 6
[   12.718300] cryptd: max_cpu_qlen set to 1000
[   12.745055] rtk_btusb: download_data done
[   12.745061] rtk_btusb: HCI reset.
[   12.756034] rtk_btusb: read_ver_rsp->lmp_subver = 0xcbc9
[   12.756042] rtk_btusb: read_ver_rsp->hci_rev = 0x9a8
[   12.756044] rtk_btusb: patch_entry->lmp_sub = 0x8822
[   12.756053] rtk_btusb: Rtk patch end 0
[   12.756056] rtk_btusb: btusb_open set HCI_RUNNING
[   12.756079] rtk_btcoex: Open BTCOEX
[   12.756081] rtk_btusb: btusb_open end
[   12.758049] rtk_btcoex: BTCOEX hci_rev 0x09a8
[   12.758056] rtk_btcoex: BTCOEX lmp_subver 0xcbc9
[   12.778044] rtk_btusb: btusb_notify: hci0 evt 3
[   12.921620] tegra210-adsp tegra210-adsp: Loaded app wire
[   12.921631] tegra210-adsp tegra210-adsp: Loaded app apm
[   12.921634] tegra210-adsp tegra210-adsp: Loaded app adma
[   12.921636] tegra210-adsp tegra210-adsp: Loaded app adma_tx
[   12.921640] nvadsp_set_adma_dump_reg: callback for adma reg dump is sent to 0000000012e192b9
[   12.947809] tegra210-adsp tegra210-adsp: Tegra210 ADSP driver successfully registered
[   13.227003] using random self ethernet address
[   13.231702] using random host ethernet address
[   13.458752] loop: module loaded
[   13.602946] Mass Storage Function, version: 2009/09/11
[   13.602956] LUN: removable file: (no medium)
[   13.606167] using random self ethernet address
[   13.612996] using random host ethernet address
[   13.628261] rndis0: HOST MAC 52:94:9b:24:40:d8
[   13.628285] rndis0: MAC 52:94:9b:24:40:d9
[   13.628702] usb0: HOST MAC 52:94:9b:24:40:da
[   13.628705] usb0: MAC 52:94:9b:24:40:db
[   13.628729] tegra-xudc 3550000.xudc: EP 0 (type: ctrl, dir: out) enabled
[   13.632606] l4tbr0: port 1(rndis0) entered blocking state
[   13.632618] l4tbr0: port 1(rndis0) entered disabled state
[   13.632907] device rndis0 entered promiscuous mode
[   13.640023] l4tbr0: port 2(usb0) entered blocking state
[   13.640039] l4tbr0: port 2(usb0) entered disabled state
[   13.640196] device usb0 entered promiscuous mode
[   13.850145] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.850160] Bluetooth: BNEP socket layer initialized
[   14.026117] Generic FE-GE Realtek PHY r8169-8-100:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-8-100:00, irq=IGNORE)
[   14.230316] r8169 0008:01:00.0 eth0: Link is Down
[   14.706472] tegra-xudc 3550000.xudc: EP 5 (type: intr, dir: in) enabled
[   14.706491] tegra-xudc 3550000.xudc: EP 3 (type: bulk, dir: in) enabled
[   14.706505] tegra-xudc 3550000.xudc: EP 2 (type: bulk, dir: out) enabled
[   14.706573] tegra-xudc 3550000.xudc: EP 9 (type: intr, dir: in) enabled
[   14.706587] tegra-xudc 3550000.xudc: EP 7 (type: bulk, dir: in) enabled
[   14.706600] tegra-xudc 3550000.xudc: EP 4 (type: bulk, dir: out) enabled
[   14.706632] tegra-xudc 3550000.xudc: EP 15 (type: intr, dir: in) enabled
[   14.706650] tegra-xudc 3550000.xudc: EP 11 (type: bulk, dir: in) enabled
[   14.706667] tegra-xudc 3550000.xudc: EP 6 (type: bulk, dir: out) enabled
[   14.706696] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
[   14.749968] tegra-xudc 3550000.xudc: EP 13 (type: bulk, dir: in) enabled
[   14.749986] tegra-xudc 3550000.xudc: EP 8 (type: bulk, dir: out) enabled
[   14.750270] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[   14.752227] tegra-xudc 3550000.xudc: ep 13 disabled
[   14.752310] tegra-xudc 3550000.xudc: ep 8 disabled
[   14.771757] tegra-xudc 3550000.xudc: EP 13 (type: bulk, dir: in) enabled
[   14.771773] tegra-xudc 3550000.xudc: EP 8 (type: bulk, dir: out) enabled
[   15.522873] pstore: Using crash dump compression: deflate
[   15.522919] printk: console [ramoops-1] enabled
[   15.522922] pstore: Registered ramoops as persistent store backend
[   15.522924] ramoops: using 0x200000@0x268000000, ecc: 0
[   15.539447] l4tbr0: port 2(usb0) entered blocking state
[   15.539455] l4tbr0: port 2(usb0) entered forwarding state
[   15.539519] l4tbr0: port 1(rndis0) entered blocking state
[   15.539522] l4tbr0: port 1(rndis0) entered forwarding state
[   15.547988] nvgpu: 17000000.ga10b                 tpc_pg_mask_store:1067 [INFO]  no value change, same mask already set
[   15.654226] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
[   15.671499] nvgpu: 17000000.ga10b                  gk20a_scale_init:539  [INFO]  enabled scaling for GPU

[   15.839443] zram: Added device: zram0
[   15.839620] zram: Added device: zram1
[   15.841949] zram: Added device: zram2
[   15.842487] zram: Added device: zram3
[   15.842672] zram: Added device: zram4
[   15.842826] zram: Added device: zram5
[   15.875890] zram0: detected capacity change from 0 to 641093632
[   15.920530] Adding 626064k swap on /dev/zram0.  Priority:5 extents:1 across:626064k SS
[   15.923799] zram1: detected capacity change from 0 to 641093632
[   15.962261] Adding 626064k swap on /dev/zram1.  Priority:5 extents:1 across:626064k SS
[   15.963485] zram2: detected capacity change from 0 to 641093632
[   16.002166] Adding 626064k swap on /dev/zram2.  Priority:5 extents:1 across:626064k SS
[   16.003457] zram3: detected capacity change from 0 to 641093632
[   16.034086] Adding 626064k swap on /dev/zram3.  Priority:5 extents:1 across:626064k SS
[   16.035278] zram4: detected capacity change from 0 to 641093632
[   16.062458] Adding 626064k swap on /dev/zram4.  Priority:5 extents:1 across:626064k SS
[   16.063645] zram5: detected capacity change from 0 to 641093632
[   16.098135] Adding 626064k swap on /dev/zram5.  Priority:5 extents:1 across:626064k SS
[   16.516593] Bridge firewalling registered
[   16.771707] fuse: init (API version 7.32)
[   16.875486] nvidia-modeset: Loading NVIDIA UNIX Open Kernel Mode Setting Driver for aarch64  35.3.1  Release Build  (buildbrain@mobile-u64-6289-d7000)  Sun Mar 19 08:09:35 PDT 2023
[   17.107152] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080013f result 0x56:
[   17.108019] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080017e result 0x56:
[   17.111778] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x2080014a result 0x56:
[   17.150848] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x731341 result 0xffff:
[   17.151214] NVRM rpcRmApiControl_dce: NVRM_RPC_DCE: Failed RM ctrl call cmd:0x730190 result 0x56:

Hi,

do you have nvidia.ko, nvidia-modeset.ko, and nvidia-drm.ko inside your file system?
What do you get if you try to load them manually?

Is display the only thing that is not functioning correctly on your device?

Hello, yes it has nvidia.ko, nvidia-modeset.ko, and nvidia-drm.ko files.

Command output:
sakaci@ubuntu:~$ ls /lib/modules/5.10.104-tegra/extra/opensrc-disp/
nvidia-drm.ko nvidia.ko nvidia-modeset.ko

Hi,

then are you able to load them manually with insmod?
Want to know if your situation is the same with this topic:

Can you find a DevKit board for validation with the same BSP?

I use the following command and dmesg message is below.

sudo insmod /lib/modules/5.10.104-tegra/extra/opensrc-disp/nvidia-drm.ko

[   27.827229] [drm] [nvidia-drm] [GPU ID 0x00020000] Loading driver
[   27.827238] [drm] Initialized nvidia-drm 0.0.0 20160202 for 13800000.display on minor 0

I also use startx command and i take the following output.

sakaci@ubuntu:~$ startx
xauth:  file /home/sakaci/.Xauthority does not exist


X.Org X Server 1.20.13
X Protocol Version 11, Revision 0
Build Operating System: linux Ubuntu
Current Operating System: Linux ubuntu 5.10.104-tegra #1 SMP PREEMPT Sun Mar 19 07:55:28 PDT 2023 aarch64
Kernel command line: root=PARTUUID=df5b9347-ea46-4dfd-a8b6-d5d743021bcb rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nv-auto-config 
Build Date: 07 February 2023  12:48:13PM
xorg-server 2:1.20.13-1ubuntu1~20.04.6 (For technical support please see http://www.ubuntu.com/support) 
Current version of pixman: 0.38.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Mon Jul 17 01:50:06 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

I ran the startx command several times in a row, and after a few oscillations, it finally opened. However, I think there is a problem with the opening. I can use it for now but you should publish a new release.

1 Like

There is no way we can fix anything with just this poor info over this thread…
Try to clarify how to reproduce your issue on devkit with a stable method first…

For example, we only got report about startx issue from you but no other users. Thus, it could be a single case or an issue that hardly to reproduce.

Hi,

我這邊也有遇到類似問題,在asus vg289q的螢幕開機完後會黑畫面,但LG 24ud58-b的螢幕就正常
模組是Jetson Orin NX 16GB, 使用B442自定義板子, 僅接HDMI

p@p-desktop:~$ ls /lib/modules/5.10.104-tegra/extra/opensrc-disp/
nvidia-drm.ko  nvidia.ko  nvidia-modeset.ko
p@p-desktop:~$ sudo insmod /lib/modules/5.10.104-tegra/extra/opensrc-disp/nvidia-drm.ko
[sudo] password for p: 
p@p-desktop:~$ sudo dmesg | grep nvidia-drm
[  123.469123] [drm] [nvidia-drm] [GPU ID 0x00020000] Loading driver
[  123.469135] [drm] Initialized nvidia-drm 0.0.0 20160202 for 13800000.display on minor 0
p@p:~$ lsmod | grep nvidia
nvidia_modeset       1093632  6
nvidia               1339392  13 nvidia_modeset

report_dmesg_0718.log (97.3 KB)

一樣使用startx指令後能點亮螢幕,但幾乎任何視窗軟體都無法開啟,且重開機後一樣重現原本問題

Hi @aidenchang

請問你是原po的同事之類的嗎? 如果不是的話可以開一個新的topic我們再來確認

另外, 所有Orin HDMI issue都建議先使用orin nx/nano 加上xavier nx底板的方式進行複製
如果你們沒有這個底板複製的話 麻煩把測試的步驟給我們.

1 Like

Hi @WayneWWW

我跟原po不是同事,只是搜尋問題剛好看到

好的了解,我這邊先自行測試一下,有需要會再開新的topic,謝謝

1 Like

開新的topic的話麻煩再tag我. thanks.

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.