Jetson Orin Nano failed to flash with SDK manager

Robotics & Edge Computing Jetson Systems Jetson Orin Nano
1

I have a Orin Nano, has previously flashed with an SD card, but now lost it, so I am going to install the Jetpack 6.2.1 on my Orin Nano with SDK manager on my virtual ubuntu 20.04 on windows. Flashing is never successful and cannot even any percentage (stuck even before 0%) downloaded all filed, but cant flash, it just pops up that it is likely a USB issue.

The attempts failed.
I have experimented with usbipd auto attatch and with both a USBA-C and thunderbolt 3 cables (Belkin for both). All failed.

The ubuntu page shows: (sdkmanager-gui:3425): dconf-WARNING **: 21:09:55.069: failed to commit changes to dconf: Unknown or unsupported transport “disabled” for address “disabled:”

屏幕截图 2026-02-03 211610
屏幕截图 2026-02-03 2116101385×895 171 KB

屏幕截图 2026-02-03 211514
屏幕截图 2026-02-03 2115141383×872 192 KB

SDKM_logs_JetPack_6.2.1_(rev._1)Linux_for_Jetson_Orin_Nano[8GB_developer_kit_version]_2026-02-03_20-51-55.zip|attachment (669.8 KB)

2

I have the Jetson Orin Nano (original version) that is the 8GB version

Properly shorted the pins, and done according to the guide. What is wrong? Thanks

6

Hi,

Please install the latest NVIDIA SDK Manager on Windows
SDK Manager | NVIDIA Developer.

If flashing still fails, please set up a native Ubuntu environment and use SDK Manager there to flash the device.

Thanks

7

Solved. Thanks!

8

Hi,

Thank you for your feedback.
Please mark the solution ✅ so we could close the bug.

Thanks