Jetson TX2 Interlaced

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Hi

We have an application to send an analog video stream from the TX2 through an encoder.

But the issue is that the HDMI signal form TX2 is progressive. And most of the encoder ICs we have found are converting an Interlace HDMI to CVBS (Doesn’t do P to I conversion ).

So, anyone has a solution for this issue?

Thanks

2

Hi, HDMI SW does not support interlaced mode, hope someone has such solution can share.

3

until then, are you planning to support this mode?

4

Not yet, if possible there will update doc.