I was trying to install the latest JetPack 5.1.2 on a Jetson Xavier Developer kit using SDK Manager. The Xavier developer kit also has a Samsung 500MB SSD installed. After installation, I went ahead to install the other SDK software components and hit an error i.e. not enough memory. Upon checkin…

@DaveYYY My colleague has a 128GB SSD and after using SDK manager, the entire SSD is used. Is there a way for you to check whether it is a limitation in the script ? Also, I used the method suggested by JetsonHack (Booting from SSD), the entire 500GB in the SSD is partitioned also. jetson…

Please follow steps shown here for preparation: https://docs.nvidia.com/jetson/archives/r35.4.1/DeveloperGuide/text/IN/QuickStart.html $ tar xf ${L4T_RELEASE_PACKAGE} $ sudo tar xpf ${SAMPLE_FS_PACKAGE} -C Linux_for_Tegra/rootfs/ $ cd Linux_for_Tegra/ $ sudo ./apply_binaries.sh $ sudo ./tools/l4t_…

What should be the values for environment variables: ${L4T_RELEASE_PACKAGE} and ${SAMPLE_FS_PACKAGE}

[image] user70581: ${L4T_RELEASE_PACKAGE} File with this link https://developer.nvidia.com/downloads/embedded/l4t/r35_release_v4.1/release/jetson_linux_r35.4.1_aarch64.tbz2/ [image] user70581: ${SAMPLE_FS_PACKAGE} File with this link https://developer.nvidia.com/downloads/embedded/l4t…

I did the flashing. After rebooting, it still shows it is 45% full. I checked the disk partition, it is still the same as reported earlier. Is there any log I can send to you ?

Then can you please try with a different disk? Not sure if it’s some compatibility issues, but I’m sure it uses all the space on my 128GB SSD.

10Aug2023-1328.log (162.1 KB) I flashed it again and attached is the screen outputs. What I did. Downloaded the 2 files and set environment variables samsungt7@samsungT7:~/Downloads/flashing$ printenv | grep L4T_RELEASE L4T_RELEASE_PACKAGE=Jetson_Linux_R35.4.1_aarch64.tbz2 samsungt7@samsungT…

Looks like the flash did not complete, so partitions on the SSD stayed the same. For initrd flash, you should see lines of Waiting for target to boot-up… popping up, indicating that the flashing script is waiting for the device to boot into initrd, so rootfs can be flashed into it. Can you ple…

How do I “collect the serial console” log ?

[image] NVIDIA Jetson Xavier AGX - In Board - Getting in Board - Serial Console This wiki contains a development guide for NVIDIA Jetson Xavier AGX and all its components. Connect the micro USB cable to the device, and you should see bunch of /dev/ttyUSBx on …

Do I need to put the Xavier into recovery mode? I can’t find /dev/ttyUSB??? [Screenshot from 2023-08-10 13-48-56]

Jetson Xavier Installation via SDK Manager

Robotics & Edge Computing Jetson Systems Jetson AGX Xavier

DaveYYY August 29, 2023, 7:18am 33

Hi @vebjornjr,

have you tried this method?

Topic		Replies	Views
Only 525Mb left of disk space after flashing a 256Gb SD card with the SDK manager. What's going on? Jetson Xavier NX reflash	20	3838	September 2, 2020
Installing jetpack on jetson xavier nx via SDK Manager always fails Jetson Xavier NX reflash	10	902	February 9, 2024
Flashing JetPack on an NVMe SSD on Xavier AGX Jetson AGX Xavier boot , cboot , ssd , nvme	9	5468	August 23, 2023
Xavier NX Root partition too small SDK install NVME Jetson Xavier NX	8	604	December 24, 2023
Jetson Xavier AGX Flash to NVMe SSD resize Jetson AGX Xavier reflash	1	574	February 5, 2024
Controlling APP size partition JetPack 5.1.2 Jetson AGX Xavier linux	3	1667	September 19, 2023
Failing consecutively to extend APP partition for booting on NVME SSD Jetson Xavier NX boot	7	494	May 31, 2024
Flashing to external SSD on AGX Xavier Devkit Jetson AGX Xavier reflash	6	613	March 15, 2024
AGX Xavier - SD flash - JetPack 5.1.4 Jetson AGX Xavier boot , reflash	14	369	February 26, 2025
Issue flashing SSD with SDK manager Jetson Xavier NX sdkm	5	704	November 14, 2023

Jetson Xavier Installation via SDK Manager

Related topics